® 116 True-rms Multimeters Brugsanvisning PN 2538688 July 2006, Rev. 1, 2/07 (Danish) © 2006, 2007 Fluke Corporation. All rights reserved. Printed in China. All product names are trademarks of their respective companies.
BEGRÆNSET GARANTI OG BEGRÆNSNING PÅ ANSVAR Fluke garanterer instrumentet mod materiale- og produktionsfejl i tre år fra købsdato. Garantien omfatter ikke sikringer, engangsbatterier og skader, der er opstået ved uheld, forsømmelighed, misbrug, modificering, kontaminering eller unomal betjening og håndtering. Forhandlere har ingen bemyndigelse til at udstede nogen anden garanti på Flukes vegne. Krav iht.
True-rms Multimeter Indledning Flukes model 116 er et batteridrevet multimeter (benævnt som "instrumentet" her i brugsanvisningen), der måler sand effektiv strømværdi, med visning op til 6000 og på bloklinje. Instrumentet holder standarderne i KAT III IEC 61010-1 2. udgave. IEC 61010-1, 2. udgave opstiller fire målekategorier (KAT I – IV) efter faremoment ved stødstrøm. Instrumenter i KAT III er beregnet til at yde beskyttelse mod stødspænding i faste udstyrsinstallationer i forsyningsnet.
116 Brugsanvisning Sikkerhed "XWAdvarsel!" står anført ved forhold og fremgangsmåder, der indebærer risiko og livsfare for brugeren. "WForsigtig!" står anført ved forhold og fremgangsmåder der indebærer risiko for beskadigelse af instrument og komponent under afprøvning.
True-rms Multimeter Sikkerhed • • • • • • • • B F X J ~ Brug kun søgeledninger af den samme type, dvs. spænding, kategori og amperage, som instrumentet, og som er blevet sikkerhedsgodkendt. Tag altid søgeledningerne af instrumentet, inden batteridækslet åbnes, og inden instrumenthuset adskilles. Overhold altid gældende sikkerhedsregulativ ved arbejde i Ex-områder. Benyt altid beskyttelsesudstyr iht. gældende regulativ til arbejde i Ex-områder. Undgå at arbejde alene.
116 Brugsanvisning Skærm 6 5 7 4 3 8 9 2 1 10 14 13 15 12 11 16 eeo02f.eps 4 Nr. Signatur Betydning A B C D s R O E K Instrumentet er indstillet til gennemgangsmåling. Instrumentet er indstillet til diodeafprøvning. Indgangssignal er en negativ værdi. X Risikabel spændingsstyrke Målt indgangsspænding ≥ 30 V eller spændingsoverbelastning. Visningsfrysning er aktiveret. Den nuværende måling fastfryses på skærmen.
True-rms Multimeter Skærm Nr. Signatur F M VWX G H I J K L M N O P LoZ nµ°F°C mVµA MkΩ kHz DC AC N 610000 mV (Bloklinje) Auto Volts Auto Manual + 0L 0PEn Betydning MIN MAX AVG-funktionen er aktiveret. Maksimums-, minimums-, gennemsnits- eller den nuværende måling vises. Instrumentet er indstillet til spændings- eller kapacitansmåling med lav indgangsimpedans. Relevante måleenhedstyper. Jævn- eller vekselstrøm Advarsel om svagt batteri. Angiver instrumentets områdeindstilling. Bloklinjevisning.
116 Brugsanvisning Stik COM + 2 1 eeo01f.eps Nr. A B Beskrivelse Fælleslederindgang (retur) til alle målingstyper. Indgangsstik til måling af spænding, gennemgang, modstand, kapacitans, frekvens, temperatur, mikroampere og diodeafprøvning. bAtt CAL Err EEPr Err F11Err 6 Fejl Batteriet skal skiftes, før instrumentet kan bruges. Instrumentet skal kalibreres. Instrumentet skal kalibreres, før det kan bruges. Intern fejl. Instrumentet skal repareres, før det kan bruges. Intern fejl.
True-rms Multimeter Indstillingsknap Indstillingsknap Indstilling x e Hz (knap) D l Ω s y R S $ Målefunktion Indstiller automatisk på jævnstrøm hhv. vekselstrøm efter det registrerede indgangssignal med lav indgangsimpedans. Vekselspænding: 0.06 – 600 V. Frekvens: 5 Hz – 50 kHz. Jævnspænding: 0,001 – 600 V. Vekselspænding: 6.0 – 600 mV, jævnstrømskoblet. Jævnspænding: 0,1 – 600 mV. Modstand: 0,1 Ω – 40 MΩ. Gennemgangsbippet slår til ved < 20 Ω og slår fra ved > 250 Ω.
116 Brugsanvisning Batterisparer ("dvale") Instrumentet går i "dvale" med blank skærm, hvis man hverken stiller på indstillingsknappen, måleområde eller trykker på tasterne i 20 minutter. Hvis der trykkes på en knap eller drejes på omstillingsknappen, aktiveres instrumentet. Man kan slå dvalefunktionen fra ved at holde g-knappen nede, mens man tænder instrumentet. Dvale deaktiveres altid i MIN MAX AVG-funktionen.
True-rms Multimeter Startalternativer • I automatisk områdeindstillingsfunktion stiller instrumentet ind på visningsområdet med mindste måleenhed efter signalets art af sig selv. • Manuel områdeindstilling tilsidesætter automatisk områdeindstilling, og man skal så selv indstille måleområde. Automatisk områdeindstilling er standard, og Auto står på skærmen, når man tænder instrumentet. 1. Manuel områdeindstilling aktiveres ved at trykke på q, og der står Manual på skærmen. 2.
116 Brugsanvisning Gennemgangsafprøvning Modstandsmåling eeo06f.eps XWAdvarsel! eeo04f.eps Som forebyggelse mod elektrisk stød, tilskadekomst og instrumentskade skal man altid afbryde strøm til emner og aflade alle højspændingskondensatorer, inden modstands-, gennemgangs-, diode- og kapacitansmåling. 10 Bemærk Gennemgangsafprøvning er velegnet til hurtig og praktisk konstatering af brud på og kortslutning i kredse.
True-rms Multimeter Almindelige målinger Denne funktion indstiller også instrumentets indgangsimpedans til ca. 3 kΩ for at mindske risikoen for fejlagtig måling på grund af falsk strøm. Måling af veksel- og jævnspænding Måling af veksel- og jævnstrøm i mV eev03f.eps Automatisk spændingsområdeindstilling (AUTO V) Når indstillingsknappen stilles på x, stiller instrumentet automatisk på jævn- hhv. vekselspændingsmåling efter det givne indgangssignal mellem +- og COM -stikkene. eev18f.
116 Brugsanvisning Måling af veksel- og jævnstrømstyrke WAdvarsel! Overhold følgende sikkerhedsregler til forebyggelse af person- og instrumentskade: • Prøv aldrig på at måle strømstyrke med instrumentet serieforbundet i kredse, hvis potentiel til jord i afbrudt stand er over 600 V. • Benyt altid korrekte indgange, korrekt funktion og måleområde til måling. eev08f.eps Fotocelleskredse måles på følgende måde: 1. Stil funktionsknappen på $. 2. Forbind instrumentet med fotocellen og kontrolkassen. 3.
True-rms Multimeter Almindelige målinger Temperaturmåling Kapacitansmåling eev10f.eps XW Advarsel! eeo05f.eps Termoelementer (80BK) må aldrig tilsluttes kredse med strøm i, da så er risiko for elektrisk stød.
116 Brugsanvisning Instrumentet måler signalfrekvens ved at tælle det antal gange bølgen passerer en given tærskel per sekund. Tærskelværdien er 0 V for alle områder. Frekvensmåling XWAdvarsel! Som forebyggelse mod elektrisk stød skal man se bort fra bloklinjen ved frekvens over 1 kHz, da måleusikkerhed for bloklinje og Z ved over 1 kHz er ubestemt. Hz Hz V eev09f.eps 14 1. Frekvensmåling tændes og slukkes ved at trykke på g. Frekvensmåling virker selvsagt kun i vekselstrømsfunktionerne. 2.
True-rms Multimeter Måling af kapacitans med lavimpedans Måling af strømstyrke over 600 μA Diodeafprøvning Instrumentets millivolt- og spændingsfunktion kan bruges sammen med et mV/A-søgeben (ekstraudstyr) til strømstyrkemålinger, der går ud over instrumentets område. Sørg for, at instrumentet er indstillet på den korrekte funktion, dvs. vekselstrøm eller jævnstrøm, til den aktuelle søger. Vi henviser til Flukes-kataloger og Flukeforhandlere ang. kompatible søgere. eev07f.eps eeo14f.
116 Brugsanvisning Bloklinjen Bloklinjen virker i lighed med visere på analoginstrumenter. Den har overbelastningsindikator (>) til højre og polaritetsindikator (+) til venstre. Da bloklinjen reagerer meget hurtigere end digitalvisningen, er den velegnet til spids- og nuljustering. Vedligeholdelse Vedligeholdelse af instrumentet består af udskiftning af batterier og rengøring af huset. Batteriskifte Bloklinjen er imidlertid deaktiveret i kapacitans- og temperaturmålefunktionerne.
True-rms Multimeter Rengøring XWAdvarsel! Som forebyggelse mod stød, personog instrumentskade skal man altid tage søgeledningerne af instrumentet forud for åbning af hus og batteridæksel. Batteridækslet åbnes på følgende måde til batteriskifte: 1. Tag søgeledningerne ud af indgangsstikkene. 2. Tag skruen af batteridækslet. 3. Løft dækslet en smule med fingerspidsen i udskæringen. 4. Løft dækslet lige opad, og tag det af huset.
116 Brugsanvisning Alm. specifikationer Opgivne måleusikkerhed gælder i 1 år efter kalibrering ved driftstemperatur på 18 °C – 28 °C og relativ luftfugtighed på 0 % – 90 %. Nærmere specifikationer fås på www.Fluke.com. Maksimal spænding over indgangsstik hhv. et stik og jord ...................................... 600 V Strødstrømssikring ..................................... 6 kV iht. IEC 61010-1.600V KAT III, forureningsgrad 2 Skærm..........................................................
True-rms Multimeter Alm. specifikationer Skema 1.
116 Brugsanvisning Skema 1. Måleusikkerhed (fortsat) Funktion Område Måleenhed Usikkerhed, ± ([% af måling] + [afvigelse]) Bip slåer til < 20 Ω, fra > 250 Ω; registrerer afbrydelse og kortslutning af 500 μs varighed og derover.
True-rms Multimeter Alm. specifikationer Skema 1. Måleusikkerhed (fortsat) Funktion A vekselstyrke, sand effektiv strømværdi[1] (45 Hz – 1 kHz) Område 600,0 μA Måleenhed 0,1 μA Usikkerhed, ± ([% af måling] + [afvigelse]) 1,5 % + 3 (2,5 % + 3 > 500 Hz) μA jævnstyrke 600,0 μA 0,1 μA 1,0 % + 2 Hz (V indgang)[3] 99,99 Hz 999,9 Hz 9,999 kHz 50,00 kHz 0,01 Hz 0,1 Hz 0,001 kHz 0,01 kHz 0,1 % + 2 Bemærk: [1] Alle vekselstrømsområder, undtagen Autospænding-V LoZ, gælder 1 % – 100 % af området.
116 Brugsanvisning Skema 2.