Product Manual

525B
Users Manual
4-18
Command Syntax
The following syntax rules apply to all the remote commands. Information about
syntax of response messages is also given.
Parameter Syntax Rules
Table 4-8 lists the units accepted in command parameters and used in responses.
All commands and units may be entered in upper or lower case.
Table 4-8. Units Accepted in Parameters and Used in Responses
Units Meaning
μV Volts in units of microvolts
1
mV Volts in units of millivolts
1
V Volts in units of volts
kV Volts in units of kilovolts
1
μA Current in units of microamperes
1
mA Current in units of milliamps
1
A Current in units of amps
Ohm Resistance in units of ohms
kOhm Resistance in units of kilohms
1
MOhm Resistance in units of megohms
1
cel Temperature in degrees Celsius
far Temperature in degrees Fahrenheit
psi Pressure in pound-force per square inch
mmHg Pressure in millimeters of mercury
inHg Pressure in inches of mercury
inH2O4C Pressure in inches of water at 4 °C
inH2O20C Pressure in inches of water at 20 °C
cmH2O4C Pressure in centimeters of water at 4 °C
CmH2O20C Pressure in centimeters of water at 20 °C
bar Pressure in bar
mbar Pressure in millibar
kpal Pressure in kilopascal
kg/cm2 Pressure in kilograms per square centimeter
1. Parameter only