User manual

Infrared Thermometer
Display
7
Save
To save readings:
1. Pull the trigger to take a measurement and release it to stop.
2. Push the Save softkey to enter the Save menu.
3. Push the Yes softkey to save the reading.
The saved reading includes:
• IR temperature
• Thermocouple temperature (if connected)
• Emissivity
• Min/Max/Avg/Dif (if Min/Max or Avg/Dif is enabled)
• Date/Time
You can push the Cancel softkey to stop saving the reading.
Light
The Product has a backlight display with two brightness levels.
To toggle the backlight brightness, push the Light softkey.
To disable the backlight, use the Setup menu.
Memory
The Product can store up to 99 measurement records.
To access records stored in memory, push the Menu softkey until
Mem shows as the left softkey, and then push the Mem softkey to
access the Memory menu.
Emissivity Menu
The Emissivity menu includes a list of pre-defined materials and
lists their typical emissivity values. See Table 3 for further
information.