User manual

568 EX
Users Manual
14
Product Operation
Temperature Measurement
To measure temperature, point the Product at an object and pull
the trigger. You can use the laser pointer to help aiming. You can
also insert the KTC probe for contact measurement. Be sure to
consider distance-to-spot size ratio and field of view (see “Distance
and Spot Size” and “Field of View”).
Note
The laser is used for aiming purposes only and is not
related to temperature measurement.
The Product automatically powers down after 20 seconds of
inactivity. To turn the Product on, pull the trigger.
Find a Hot or Cold Spot
To find a hot or cold spot, aim the Product outside the necessary
area. Then, slowly scan across the area with an up and down
motion until the hot or cold spot is found (see Figure 4).
eyl07.eps
Figure 4. Find a Hot or Cold Spot