Item Brochure
CV Series
ClirVu
®
Infrared
Windows
Technical Data
Compliance without compromise.
Safety without sacrifice.
Increase the safety and speed of electri-
cal thermal imaging inspections with the new
Fluke ClirVu
®
IR Windows. Reduce the risk of
arc-flash and electrocution, increase the safety
of your personnel and reduce the time and
cost of preventive maintenance.
•Nomoreremovingthepaneldoorfor
installation
•WorkpermitrequirementsandNFPA70E
processes are significantly reduced
•FullPPEisoftennotrequiredsoinspections
are done faster and more comfortable
• Superior arc blast protection:
– High temperature silicon gaskets
– Mounting and door latches provide high pressure
gasket compression
– Die cast components are manufactured with the
highest strength alloys
– Jam nut screws are made from 4037 steel, heat
treated to 160,000 psi tensile
• Torture Tested to the highest test ratings
– IEEE C37.20.7 63 kA Arc tested at KEMA, UL
50/50E/50V, UL1558, IEC60529-1: IP67, IEC
60068, NEMA 4/12, CSA C22.2 NO. 14-13:2012,
and CE
• Quick and easy installation
– Installation takes 5 minutes with one technician
– Only one hole necessary with standard Greenlee
®
punch. Rear access required for punch connection
only (Easily accomplished with one technician)
– Installs from front; no template needed; no rear
access required
– Grounds instantly to metal enclosure with patent
pending AutoGround
™
process
– Sharp teeth on jam nuts assure four gas-tight
ground connections
– All components have electrically conductive
finishes for optimum grounding
• Quarter turn latch easily opens hinged cover
• Corrosion and UV resistance for challenging outdoor
environments
• Three sizes 50 mm, 75 mm and 95 mm (2 in , 3 in
and 4 in) with the option of hand turn or security
key door latches