Datasheet

CV Series
ClirVu
®
Infrared
Windows
Technical Data
Compliance without compromise.
Safety without sacrifice.
Increase the safety and speed of electri-
cal thermal imaging inspections with the new
Fluke ClirVu
®
IR Windows. Reduce the risk of
arc-flash and electrocution, increase the safety
of your personnel and reduce the time and
cost of preventive maintenance.
•Nomoreremovingthepaneldoorfor
installation
•WorkpermitrequirementsandNFPA70E
processes are significantly reduced
•FullPPEisoftennotrequiredsoinspections
are done faster and more comfortable
• Superior arc blast protection:
– High temperature silicon gaskets
– Mounting and door latches provide high pressure
gasket compression
– Die cast components are manufactured with the
highest strength alloys
– Jam nut screws are made from 4037 steel, heat
treated to 160,000 psi tensile
• Torture Tested to the highest test ratings
– IEEE C37.20.7 63 kA Arc tested at KEMA, UL
50/50E/50V, UL1558, IEC60529-1: IP67, IEC
60068, NEMA 4/12, CSA C22.2 NO. 14-13:2012,
and CE
• Quick and easy installation
– Installation takes 5 minutes with one technician
– Only one hole necessary with standard Greenlee
®
punch. Rear access required for punch connection
only (Easily accomplished with one technician)
– Installs from front; no template needed; no rear
access required
– Grounds instantly to metal enclosure with patent
pending AutoGround
™
process
– Sharp teeth on jam nuts assure four gas-tight
ground connections
– All components have electrically conductive
finishes for optimum grounding
• Quarter turn latch easily opens hinged cover
• Corrosion and UV resistance for challenging outdoor
environments
• Three sizes 50 mm, 75 mm and 95 mm (2 in , 3 in
and 4 in) with the option of hand turn or security
key door latches