Datasheet

ManualsBrandsFLUKE ManualsTest & Measurement Accessoriesi1730-flex1500

PN 4272192

September 2013

All product names are trademarks of their respective companies.

iFlex-1500-12

iFlex-3000-24

iFlex-6000-36

Thin-Flexi Current Probe

Safety Information

Go to www.fluke.com to register your product, download manuals, and

find more information.

A Warning identifies conditions and procedures that are dangerous to

the user.

 Warning

To prevent possible electrical shock, fire, or personal

injury:

• Read all safety information before you use the

Product.

• Use the Product only as specified, or the protection

supplied by the Product can be compromised.

• Comply with local and national safety codes. Use

personal protective equipment (approved rubber

gloves, face protection, and flame-resistant clothes)

to prevent shock and arc blast injury where

hazardous live conductors are exposed.

• Do not use the Product around explosive gas, vapor,

or in damp or wet environments.

• Do not touch voltages >30 V ac rms, 42 V ac peak, or

60 V dc.

• De-energize the circuit or wear personal protective

equipment in compliance with local requirements

before you apply or remove the Product.

• Do not use the Product if it is damaged.

Summary of content (4 pages)

PAGE 1
iFlex-1500-12 iFlex-3000-24 iFlex-6000-36 Thin-Flexi Current Probe Safety Information Go to www.fluke.com to register your product, download manuals, and find more information. A Warning identifies conditions and procedures that are dangerous to the user.  Warning To prevent possible electrical shock, fire, or personal injury: • Read all safety information before you use the Product. • Use the Product only as specified, or the protection supplied by the Product can be compromised.
PAGE 2
• Do not use the Product if it operates incorrectly. • Before each use, examine the Product. Look for cracks or missing pieces of the clamp housing or output cable insulation. Also look for loose or weakened components. Carefully examine the insulation around the jaws. • Do not use a current measurement as an indication that a circuit is safe to touch. A voltage measurement is necessary to know if a circuit is hazardous. • Have an approved technician repair the Product.
PAGE 3
The table below is a list of symbols used on the product or in this document. Symbols Symbol Meaning  Risk of Danger. Important information. See Manual.  Hazardous voltage  CAT II CAT III CAT IV Double insulation Measurement Category II is applicable to test and measuring circuits connected directly to utilization points (socket outlets and similar points) of the lowvoltage MAINS installation.
PAGE 4
LIMITED WARRANTY AND LIMITATION OF LIABILITY This Fluke product will be free from defects in material and workmanship for one year from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke’s behalf.