Instructions

Pressure Calibration Kit
The optional Fluke 700PCK (Pressure Calibration Kit)
accessory lets you calibrate the pressure modules at
your facility with your precision pressure standards. A
pressure calibrator or dead weight tester that is at least
4X more accurate than the pressure module under test is
recommended.
Performance Test
If you need to check that the pressure module meets its
accuracy specication, use a dead weight tester or suitable
pressure calibrator. The accuracy of the dead weight tester
or pressure calibrator should be signicantly better than the
Product pressure specication. Proceed as follows to verify
that a pressure module is operating within specication:
1. Read the pressure value with no externally applied
pressure to make sure the 0 % of scale is correct. When
reading the pressure, press the ZERO key to remove
any zero offset.
2. Connect the pressure module to a dead weight tester.
3. Set the dead weight tester to 20 % of the pressure
module’s full scale value.
4. Make sure the reading agrees with the dead weight
tester value within the specications.
5. Set the dead weight tester to 40, 60, 80, and 100 % of
full scale and compare the respective readings.
Specications
Mechanical Specications
Size (H X W X L) .......45 mm X 94 mm X 110 mm
. . . . . . . . . . . . . . . . . . . . .(1.77 in X 3.70 in X 4.33 in)
Weight . ..............292 g (10.3 oz)
Physical Interface .......Serial Connector, Pressure Port
Environmental Specications
Operating Temperature...-10 °C to +50 °C (14 °F to 122 °F)
Storage Temperature ....-20 °C to +60 °C (-4 °F to 140 °C)
Operating Humidity......Non condensing (<10 °C) (<50 °F)
90 % RH (10 °C to 30 °C) (50 °F to
86 °F)
75 % RH (30 °C to 40 °C) (86 °F to
104 °F)
45 % RH (40 °C to 50 °C) (104 °F
to 122 °C)
Operating Altitude ......2000 m (6,561 ft)
Storage Altitude ........12000 m (45,700 ft)
IP Rating..............IP 52
Compliance
Agency Approvals.......
CE...................IEC 61010-1
Protection Class II
Pollution Degree 2
EMI, RFI, EMC .........EN61326-1
Electromagnetic Compatibility
Applies to use in Korea only.
Class A equipment (Industrial
Broadcasting & Communication
Equipment)
[1]
[1] This Product meets
requirements for industrial (Class A)
electromagnetic wave equipment
and the seller or user should
take notice of it. This equipment
is intended for use in business
environments and is not to be used
in homes.
How to Contact Fluke
To contact Fluke, call one of the following telephone numbers:
● Technical Support USA: 1-800-44-FLUKE (1-800-443-
5853)
● Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-
5853)
● Canada: 1-800-36-FLUKE (1-800-363-5853)
● Europe: [phone]
● Japan: [phone]
● Singapore: [phone]
● Anywhere in the world: [phone]
Or, visit Fluke’s website at www.uke.com.
To register your product, visit http://register.uke.com.
To view, print, or download the latest manuals or manual
supplement,
visit http://us.uke.com/usen/support/manuals.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and
workmanship for three years from the date of purchase.
This warranty does not cover fuses, disposable batteries,
or damage from accident, neglect, misuse, alteration,
contamination, or abnormal conditions of operation or
handling. Resellers are not authorized to extend any other
warranty on Fluke’s behalf. To obtain service during the
warranty period, contact your nearest Fluke authorized
service center to obtain return authorization information, then
send the product to that Service Center with a description of
the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER
WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS
NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL
OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING
FROM ANY CAUSE OR THEORY. Since some states or
countries do not allow the exclusion or limitation of an implied
warranty or of incidental or consequential damages, this
limitation of liability may not apply to you.
Fluke Corporation Fluke Europe B.V.
P.O. Box 9090 P.O. Box 1186
Everett, WA 98206-9090 5602 BD Eindhoven
U.S.A. The Netherlands
11/99