Product Manual
Table Of Contents
- Ti90, Ti95, Ti100, Ti105, Ti110, Ti125, TiR105, TiR110, TiR125 Users Manual
- Introduction
- How to Contact Fluke
- Safety Information
- Radio Frequency Data
- Accessories
- Before You Start
- Features and Controls
- Focus
- Primary and Secondary Triggers
- How to Use the Control Buttons
- How to Use the Menus
- Image Capture
- SD Memory Card
- Temperature Measurement
- SmartView® Software
- Menus
- Maintenance
- General Specifications
- Detailed Specifications
Performance Series Thermal Imagers
Menus
37
To set the IR-Fusion mode:
1. Push .
2. Push / to highlight Measurement.
3. Push or to view the menu.
4. Push / to highlight Image.
5. Push or to view the menu.
6. Push / to highlight IR-Fusion.
7. Push or to view the menu.
8. Push / to highlight an option.
9. Push:
• to set the change and go back to the live view.
• or to set the change and go back to the previous menu.
• to cancel the change and go back to the live view.
Color Alarm (Temperature Alarm)
Certain models have various apparent temperature color alarms. The high-
temperature color alarm shows a full visible image and only shows infrared
information on objects or areas that are above the set apparent temperature
alarm level. The low-temperature/dew point color alarm shows a full visible
image and only shows infrared information on objects or areas that are below
the set apparent temperature/dew point color alarm level. The user must
manually find and set these parameters. Certain models also display color
isotherms, or infrared information, inside or outside of a set of both high and
low limits.