Product Manual
Table Of Contents
- Ti90, Ti95, Ti100, Ti105, Ti110, Ti125, TiR105, TiR110, TiR125 Users Manual
- Introduction
- How to Contact Fluke
- Safety Information
- Radio Frequency Data
- Accessories
- Before You Start
- Features and Controls
- Focus
- Primary and Secondary Triggers
- How to Use the Control Buttons
- How to Use the Menus
- Image Capture
- SD Memory Card
- Temperature Measurement
- SmartView® Software
- Menus
- Maintenance
- General Specifications
- Detailed Specifications
Performance Series Thermal Imagers
Menus
39
Set Low-Temperature/Dew Point Color Alarm
To set a low-temperature/dew point color alarm:
1. From the Color Alarm menu, push / to highlight Set Low
Alarm.
2. Push to open the Color Alarm menu.
3. Push / to adjust the temperature setting.
4. Push:
• to set the change and go back to the live view.
• or to set the change and go back to the previous menu.
• to cancel the change and go back to the live view.
Outside/Inside Alarm
If you set values for the high-temperature color alarm and a low-temperature
color alarm, the Imager will have the options for inside or outside isotherm color
alarms.
To set an outside/inside isotherm color alarm:
1. From the Color Alarm menu, push / to highlight Outside or
Inside.
2. Push:
• to set the change and go back to the live view.
• or to set the change and go back to the previous menu.
• to cancel the change and go back to the live view.