Product Manual
Table Of Contents
- Ti90, Ti95, Ti100, Ti105, Ti110, Ti125, TiR105, TiR110, TiR125 Users Manual
- Introduction
- How to Contact Fluke
- Safety Information
- Radio Frequency Data
- Accessories
- Before You Start
- Features and Controls
- Focus
- Primary and Secondary Triggers
- How to Use the Control Buttons
- How to Use the Menus
- Image Capture
- SD Memory Card
- Temperature Measurement
- SmartView® Software
- Menus
- Maintenance
- General Specifications
- Detailed Specifications
Ti90, Ti95, Ti100, Ti105, Ti110, Ti125, TiR105, TiR110, TiR125
Users Manual
56
To display the Imager Info:
1. Push .
2. Push / to highlight Settings.
3. Push or to view the menu.
4. Push / to highlight Imager Info.
5. Push or to view the menu.
6. Push / to scroll through the menu.
7. Push:
• to set the change and go back to the live view.
• or to set the change and go back to the previous menu.
• to cancel the change and go back to the live view.
Maintenance
The Imager does not require maintenance.
Warning
To prevent eye damage and personal injury, do not open the
Product. The laser beam is dangerous to eyes. Have the Product
repaired only through an approved technical site.
How to Clean the Case
Clean the case with a damp cloth and a weak soap solution. Do not use
abrasives, isopropyl alcohol, or solvents to clean the case or lens/window.