User manual

Thermal Imagers

How to Use the Menus

The menus, coupled with the three function buttons (, , )

and arrow buttons, are the access for thermal image display, camera features,

memory review, and settings for date, time, language, units, file format, and

Imager information.

To open the primary menu, push  or . The primary menu shows five

secondary menus for Measurement, Image, Camera, Memory, and Settings.

The text above each function button (, , ) applies to that

button throughout all menu screens.

Push  to open the primary menu and push / to cycle through

the secondary menus. Each secondary menu lists an options menu. Push

/ to cycle through the options.

The primary, secondary, and option menus close 10 seconds after the last push

of a function button. The option selection menu stays open until you make the

selection, go up a menu level, or cancel the action.

Image Capture

Point the imager at the object or area of interest. Make sure that the object is in

focus. Pull and release the primary trigger. This will capture and freeze the

image. To cancel the captured image, pull the primary trigger again or 

to return to the Live view.

Depending on the selected file format settings, the Imager shows the captured

image and a menu bar. The menu bar lets you save the image, edit some

image settings, and add voice annotation or IR-PhotoNotes. To change the file

format, see File Format on page 48.