User manual

Thermal Imagers
Menus
35
5. Push  or  to view the menu.
6. Push / to highlight Palette.
7. Push  or  to view the menu.
8. Push / to highlight Standard or Ultra Contrast.
9. Push / to select a palette.
10. Push:
•  to set the change and go back to the live view.
•  or  to set the change and go back to the previous menu.
•  to cancel the change and go back to the live view.
IR-Fusion
®
IR-Fusion
®
makes it easier to understand infrared images through the use of an
aligned visible image and infrared image. The Imager automatically captures a
visible image with every infrared image to show you exactly what you see and
then allows you to more effectively show it to others.
IR-Fusion has different modes that vary by model, see Table 7. Full Visible
mode is also available. (The Fluke Ti100 does not have IR-Fusion and can only
display a full infrared image.)
Table 7. Infrared and IR-Fusion Modes by Model
Ti90 Ti95
Ti100 Ti105 Ti110 Ti125
TiR105 TiR110 TiR125
PIP
[1]
IR
•
[2]
•
[2]
• • •
[2]
• •
Full AutoBlend (min IR mode)
• • • •
Full AutoBlend (mid IR mode)
• • • • • •
Full AutoBlend (max IR mode)
• • • • • • • • •
Full Visible
• • • • • • • •
PIP AutoBlend (min)
• • • •
PIP AutoBlend (mid)
• • • • • •
PIP AutoBlend (max)
• • • • • •
[1] Picture-in-picture
[2] Ti95, Ti105, and TiR105 PIP mode from 1.2 m to 4.6 m (4 ft to 15 ft).