User manual

Ti90, Ti95, Ti100, Ti105, Ti110, Ti125, TiR105, TiR110, TiR125
Users Manual
36
To set the IR-Fusion mode:
1. Push .
2. Push / to highlight Measurement.
3. Push  or  to view the menu.
4. Push / to highlight Image.
5. Push  or  to view the menu.
6. Push / to highlight IR-Fusion.
7. Push  or  to view the menu.
8. Push / to highlight an option.
9. Push:
•  to set the change and go back to the live view.
•  or  to set the change and go back to the previous menu.
•  to cancel the change and go back to the live view.
Color Alarm
Applies to: Ti110, Ti125, TiR110, TiR125
The Imager has various apparent temperature color alarms. The high-
temperature color alarm shows a full visible image and only shows infrared
information on objects or areas that are above the set apparent temperature
alarm level. The low-temperature/dew point color alarm shows a full visible
image and only shows infrared information on objects or areas that are below
the set apparent temperature/dew point color alarm level. The user must
manually find and set these parameters. The imager also displays color
isotherms, or infrared information, inside or outside of a set of both high and
low limits.