User manual

Thermal Imagers
General Specifications
55
To get the best performance from the lithium-ion battery, use the guidelines that
follow:
• Do not store the Imager on the charger for more than 24 hours as reduced
battery life may result.
• Charge the Imager for a two-hour minimum at six-month intervals for
maximum battery life. Without use, the battery will self-discharge in
approximately six months. Batteries stored for long periods will need two to
ten charging cycles for full capacity.
• Always operate in the specified temperature range.
  Caution
Do not incinerate the Product and/or battery. Go to Fluke’s
website for recycling information.
General Specifications
Temperature
Operating ............................................................ -10 °C to +50 °C (14 °F to 122 °F)
Storage ............................................................... -20 °C to +50 °C (-4 °F to +122 °F)
without batteries
Charging ............................................................. 0 °C to 40 °C (32 °F to 104 °F)
Relative Humidity .................................................. 10 to 95 % non-condensing
Altitude
Operating ............................................................ 2,000 m
Storage ............................................................... 12,000 m
Display ................................................................... Color LCD, 3.5″ diagonal (Portrait
orientation) with Backlight (selectable
high, medium, low)