Product Manual

Before You Start

Set-Up

1-29

 Caution

Follow the specified steps on how to

establish the required connections.

1. Connect the thermography camera to the breakout

box. For this, the 14-pin connecting cable of the

breakout box must be used. It is connected to the

right-hand side 14-pin LEMO socket on the backside

of the thermal imager.

2. Connect the breakout box to the COM interface of

the host computer with a commercially available

cable.

3. Connect the supplied ac adapter to the breakout box.

4. Push the Power button  on the backside of the

camera to turn on the thermography system.

Table 1-8. Breakout Box

6 5 4

hvh061.eps

Item Description

 Connecting cable for thermal imager

 14-pin LEMO socket for ac adapter

 Terminal strip

 Trigger T1, T2 (configurable)

 BNC video port (PAL/NTSC-FBAS)

 Serial interface (RS232)