Product Manual

TiX620, TiX640, TiX660, TiX1000
Users Manual
2-10
Saving with Check
To check the image to be recorded before saving it, the
Live mode should be stopped:
1. Push the  button halfway down.
The live image is frozen: 
 .
• The frozen image can initially be "checked" on
the display or viewfinder.
• If the image is not to be saved, push the 
button:   .
2. Push the  button completely.
The image is saved.
The process of writing the data is indicated by the
changing color of the map symbol (in the line below the
image, right-hand side):
 . When saving, the
camera control automatically activates the Live mode:
  .
Quick Saving
Using the thermal imager, you can immediately save
images in the Live mode or directly from the motion:
• Immediately push the  button completely. The
image is saved immediately:  , the
camera control then automatically re-activates
the Live mode:   .
Note
Deviating from the factory setting described in
Table 2-3, the  button can be used to trigger
further functions such as shutter activation,
autofocus, visible light image-LED, laser
distance meter/laser pointer before saving the
image.