Product Manual

Display Menus
Image Submenu
3
3-7
IR Fusion
®
with Autoblend
®
Technology
(Picture-in-Picture)
In the Picture-in-Picture mode, a part of the infrared
image is superimposed over the digital image, regardless
of the temperature of the current scene. The size and the
position of the displayed infrared section can be changed
by using the joystick
: higher using ↑, lower using ↓,
wider using → and narrower using ←. The joystick Enter
button can be used to toggle between the options Resize
and Move. The merged image section can be moved to
the top ↑, to the bottom ↓, to the right → and to the left ←
In the IR Fusion
®
with Autoblend
®
Technology mode, all
temperatures of the current scene are displayed in the
selected partial area in accordance with the set
temperature scale. Blending refers to the surface area. In
the color alarm, high alarm, and low alarm modes, the
displayed temperature range can be restricted: blending
depends on the temperature in the entire infrared image.
Color Alarm
In the Color Alarm mode, a (partial) temperature interval
is defined within the set temperature range. Partial areas,
the temperatures of which are within this interval, are
displayed as an infrared image in false color
representation. Partial areas, the temperatures of which
are outside of this interval, are displayed as a digital
image (visible light image).
Upper and lower limits of the superimposed temperature
range are displayed to the left of the palette on top and at
the bottom and can be changed by using the joystick
:
↑ increase the temperature level of the IR Fusion
®
interval
↓ decrease the temperature level of the IR Fusion
®
interval
→ increase the temperature interval
← decrease the temperature interval