Product Manual

Display Menus
File Menu
3
3-21
changed parameters (emissivity, ambient temperature,
transmission, path temperature) is possible, these
parameters should be set correctly before the recording
procedure begins. Furthermore, possibly required
measurement definitions (measuring points or areas)
should be defined before starting the measurement.
These can also be created or changed during video
recording, but they can no longer be changed in the
saved video.
Autocapture
The "Autocapture" function is used for serial recording of
slower changing temperatures and simultaneously saving
thermal image and photo. The data and formats to be
saved in turn are defined in the "Saving format" menu
item (see page 3-23). The available saving speed is
influenced by the settings made at this point, but also
depends on the detector format and the properties of the
used SDHC card, just like with real-time saving.
hvh171.jpg
hvh172.jpg
To start auto capture, the start time (date, time) and the
saving interval and the number of IR images to be saved
must be defined initially. As an alternative to "Interval"
and "Count", the duration of series saving, otherwise
calculated from the values for interval and number of
images (Count), can also be defined. Depending on the
selected saving format, the minimum time interval is
shown. When opening the settings dialog using the
joystick Enter button in the "Autocapture" submenu, date
and time of the camera clock are accepted as start time.
After having accepted all settings and after closing the
dialog by clicking OK (or using the  button), series
saving starts immediately. If a later start time is required
or if recording is to be started on a different day, the date
and the start time must be changed accordingly. Then,
the dialog must also be closed by clicking OK (or using
the  button) and the activated series measurement is
indicated with a red dot below the palette. However, the
first image is then only saved at the set point in time so
that a value of "0/nnn" is shown below the palette. Series
saving ends when the defined number of images is
reached and/or the selected duration has elapsed, but
can also be stopped by pushing the joystick Enter button
in the "Autocapture" submenu. The dialog opening
thereafter allows for aborting or continuing the current
series measurement: