Product Manual

Display Menus
Measure Menu
3
3-29
Rectangle R
A rectangle selected in the "Editor" submenu in the "New"
menu item is initially displayed as a square in the center
of the image. Height and width can be changed using the
joystick. If the position of the rectangle is to be changed,
initially push the joystick Enter button. The rectangle is
then highlighted by a red dot in its center and can be
moved using the joystick without any changes to its
shape.
Ellipse E
The measuring object "Ellipse" selected in the "Editor"
submenu in the "New" menu item is initially displayed as
a circle in the center of the image. The shape can also be
changed by using the joystick
 (red mark on line) the
position can be changed after pushing the Enter button
(red mark in the center of the circle). Another ellipse can
be created using the  button.
Polygon PG
The thermal imager supports polygon planes with a
maximum of 11 points, the position of which can be
defined freely. After having defined the position of a (first)
point, a new point is created every time the Enter button
is pressed longer, whereby this new point can be moved
to its target position. Once more than one point is
created, the Enter button can be pressed shortly to toggle
between the points in a circulating manner, the position of
which can still be changed in this case. When the third
point is created, this third point is connected to the
starting point defining a plane. The Enter button must be
pressed longer to create the next point starting from the
active point in a clockwise direction. When all points are
highlighted, the polygon plane can be moved without any
changes to its shape.
Note
Individual points of a polygon cannot be deleted,
but their position can be changed.