374 FC/375 FC/376 FC Clamp Meters PN 4705494 September 2015 (Polish) © 2015 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks of their respective companies.
LIMITED WARRANTY AND LIMITATION OF LIABILITY This Fluke product will be free from defects in material and workmanship for three years from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke’s behalf.
Table of Contents Title Page Introduction ................................................................................................................. Contact Fluke ............................................................................................................. Safety Information ...................................................................................................... Replacement Part List ......................................................................................
374 FC/375 FC/376 FC Users Manual ii
Wprowadzenie Fluke 374 FC/375 FC/376 FC (produkt) mierzą prawdziwą wartość skuteczności i napięcia prądu przemiennego oraz stałego, prądu rozruchowego, rezystancji i pojemności. Modele 375 FC i 376 FC mierzą także częstotliwość oraz napięcie prądu stałego w miliwoltach. Odłączana, elastyczna sonda prądowa iFlex, która jest częścią zestawu modelu 376 FC (opcjonalna dla modeli 374 FC i 375 FC), zwiększa zakres pomiarów do 2500 A (prąd przemienny).
374 FC/375 FC/376 FC Podręcznik użytkownika Kontakt z firmą Fluke Aby skontaktować się z firmą Fluke, należy zadzwonić pod jeden z następujących numerów telefonów: • • • Dział pomocy technicznej, Stany Zjednoczone: 1-800-44-FLUKE (1-800-443-5853) Kalibracja/naprawa, Stany Zjednoczone: 1-888-99-FLUKE (1-888-993-5853) Kanada: 1-800-36-FLUKE (1-800-363-5853) • Europa: +31 402-675-200 • Japonia: +81-3-6714-3114 • Singapur: +65-6799-5566 • Na całym świecie: +1-425-446-5500 Można także odwiedzić stronę
Clamp Meters Informacje na temat bezpieczeństwa Informacje na temat bezpieczeństwa Ostrzeżenie pozwala określić warunki i procedury, które mogą być niebezpieczne dla użytkownika. Uwaga pozwala określić warunki i czynności, które mogą spowodować uszkodzenie produktu i sprawdzanych urządzeń. Symbole użyte w produkcie i w tej instrukcji przedstawia Tabela 1. XWOstrzeżenie W celu uniknięcia niebezpieczeństwa porażenia prądem, wywołania pożaru i odniesienia obrażeń: • Dokładnie przeczytać wszystkie instrukcje.
374 FC/375 FC/376 FC Podręcznik użytkownika • Należy przestrzegać wymogów lokalnych i krajowych przepisów dotyczących bezpieczeństwa. Gdy odsłonięte przewodniki są pod napięciem, należy używać środków ochrony osobistej (homologowane rękawice gumowe, ochrona twarzy i ubranie ognioodporne), zabezpieczających przed porażeniem i łukiem elektrycznym. • Urządzenie należy sprawdzić przed każdym użyciem.
Clamp Meters Informacje na temat bezpieczeństwa • Przewód pomiarowy masy należy zawsze podłączać przed przewodem pomiarowym pod napięciem. Przewód pomiarowy pod napięciem należy zawsze odłączać przed przewodem pomiarowym masy. • Przed otwarciem przedziału akumulatora odłączyć wszystkie sondy, przewody testowe i akcesoria. • Należy trzymać palce za kołnierzem ochronnym przewodów pomiarowych. • Urządzenie trzymać wyłącznie w wyznaczonym miejscu, za przegrodą na uchwycie.
374 FC/375 FC/376 FC Podręcznik użytkownika • Nie należy umieszczać magnesów wewnątrz paneli CAT IV. Należy je umieszczać na zewnątrz panelu. W celu bezpiecznego użytkowania i konserwowania urządzenia: • Jeśli nastąpił wyciek z baterii/akumulatorów, przed przystąpieniem do użytkowania produktu należy przeprowadzić niezbędne naprawy. • Naprawę zlecać wyłącznie upoważnionym do tego technikom.
Clamp Meters Informacje na temat bezpieczeństwa Tabela 1. Symbole Symbol Znaczenie Symbol Znaczenie AC (prąd przemienny) Uziemienie DC (prąd stały) X OSTRZEŻENIE. NIEBEZPIECZNE NAPIĘCIE. Ryzyko porażenia prądem. P Spełnia wymagania dyrektyw Unii Europejskiej. W OSTRZEŻENIE. RYZYKO NIEBEZPIECZEŃSTWA. Należy zapoznać się z dokumentacją użytkownika. Bateria. Wskaźnik niskiego poziomu naładowania baterii. T Podwójna izolacja Posiada certyfikat TÜV SÜD Product Service.
374 FC/375 FC/376 FC Podręcznik użytkownika Tabela 1. Symbole (ciąg dalszy) Symbol Symbol Znaczenie Kategoria pomiarowa III dotyczy obwodów testowych i pomiarowych podłączonych do niskonapięciowej części rozdzielczej instalacji zasilania sieciowego. Kategoria pomiarowa IV dotyczy obwodów testowych i pomiarowych podłączonych do źródła niskiego napięcia rozdzielczej instalacji zasilania sieciowego. Odpowiada stosownym standardom dotyczącym kompatybilności elektromagnetycznej w Australii.
Clamp Meters Lista części zamiennych Lista części zamiennych W tabeli 2 podane są dostępne części zamienne. Tabela 2.
374 FC/375 FC/376 FC Podręcznik użytkownika Produkt Clamp Meter 10
Clamp Meters Produkt fig01.eps Auto Power Off Backlight 20 ON ON fig02_3.
374 FC/375 FC/376 FC Podręcznik użytkownika Display Hold MIN MAX AVG = 1x = 2x = 3x 2 sec = Exit fig04_5.
Clamp Meters Produkt LOG (375 FC and 376 FC) Clear Memory (375 FC and 376 FC) + ON + 2 sec = LOG x1 x2 5 sec fig_16.
374 FC/375 FC/376 FC Podręcznik użytkownika Flexible Current Probe 1 2 3 <0.5 A >0.5 A fig06.
Clamp Meters Produkt Hz (375 FC & 376 FC) Jaw >5A > 20 A 1 <0.5 A >0.5 A 2 fig07.
374 FC/375 FC/376 FC Podręcznik użytkownika 3 1 <0.5 A >0.5 A 2 Fig08.
Clamp Meters Produkt mV dc (375 FC & 376 FC) fig09_10.
374 FC/375 FC/376 FC Podręcznik użytkownika ON e R <30 Fig15.
Clamp Meters Produkt On Off 3 100 ms 1 2 4 fig13_14.
374 FC/375 FC/376 FC Podręcznik użytkownika 3 1 2 fig11_12.
Clamp Meters Produkt FC Module Fluke ConnectTM Bluetooth® Connection to FC Tools 1 SAVE Fluke Connect TM 2 Connect 3 4 SAVE CAPTURE 5 6 Go to www.flukeconnect.com flukeconnect.
374 FC/375 FC/376 FC Podręcznik użytkownika Dane techniczne Maksymalne napięcie pomiędzy dowolnym zaciskiem a uziemieniem ....... 1000 V Baterie..................................................... 2 AA, NEDA 15A, IEC LR6 Temperatura pracy.................................. od -10°C do +50°C Temperatura przechowywania ................ od -40°C do +60°C Wilgotność podczas pracy ......................
Clamp Meters Dane techniczne Długość przewodu elastycznej sondy prądowej (od głowicy do złącza)............................. 1,8 m Bezpieczeństwo ...................................... IEC 61010-1, Stopień zanieczyszczenia 2 IEC 61010-2-032: CAT III 1000 V, CAT IV 600 V IEC 61010-2-033: CAT III 1000 V, CAT IV 600 V Kategoria IP ............................................ IEC 60529: IP 30 Certyfikat częstotliwości radiowej ...........
374 FC/375 FC/376 FC Podręcznik użytkownika ze względu na zakłócenia przewodzące, jak również emitowane. Po połączeniu urządzenia z obiektem testowym poziom emisji może przekraczać wymogi CISPR 11. Współczynnik temperaturowy ................. Dodatkowe 0,1 x określona dokładność na każdy stopień Celsjusza powyżej 28°C lub poniżej 18°C Pomiar natężenia prądu przemiennego za pomocą szczęki Zakres 374 FC i 375 FC ................................ 600,0 A 376 FC ...............................................
Clamp Meters Dane techniczne Pomiar natężenia prądu przemiennego przy użyciu elastycznej sondy prądowej Zakres ..................................................... 2500 A Rozdzielczość ......................................... 0,1 A (≤999,9 A) 1 A (≤2500 A) Dokładność ............................................. 3% ± 5 cyfr (5 – 500 Hz) Współczynnik szczytu (50/60 Hz) ...........
374 FC/375 FC/376 FC Podręcznik użytkownika Czułość w zależności od pozycji A B C ghn12.eps Rysunek 1.
Clamp Meters Dane techniczne Odległość od optymalnego punktu i2500-10 Flex i2500-18 Flex Błąd A 12,7 mm 35,6 mm ±0,5% B 20,3 mm 50,8 mm ±1,0% C 35,6 mm 63,5 mm ±2,0% Możliwy błąd pomiaru został ustalony w odniesieniu do sytuacji, w której podstawowy przewodnik jest umieszczony w optymalnej pozycji, nie występuje zewnętrzne pole elektryczne lub magnetyczne, a temperatura działania należy do dozwolonego zakresu. Natężenie prądu stałego Zakres 374 FC i 375 FC ................................
374 FC/375 FC/376 FC Podręcznik użytkownika Napięcie prądu przemiennego Zakres ..................................................... 1000 V Rozdzielczość ......................................... 0,1 V (≤600,0 V) 1 V (≤1000 V) Dokładność ............................................. 1,5 % ± 5 cyfr (od 20 do 500 Hz) Napięcie prądu stałego Zakres ..................................................... 1000 V Rozdzielczość ......................................... 0,1 V (≤600,0 V) 1 V (≤1000 V) Dokładność ......
Clamp Meters Dane techniczne Pomiar częstotliwości za pomocą szczęki Zakres 375 FC i 376 FC ................................ od 5,0 do 500,0 Hz Rozdzielczość ......................................... 0,1 Hz Dokładność ............................................. 0,5% ± 5 cyfr Poziom wyzwalania ................................. od 5 do 10 Hz, ≥10 A Od 10 Hz do 100 Hz, ≥5 A Od 100 Hz do 500 Hz, ≥10 A Pomiar częstotliwości za pomocą elastycznej sondy prądowej Zakres 375 FC i 376 FC ...........................
374 FC/375 FC/376 FC Podręcznik użytkownika Rezystancja Zakres 374 FC ............................................... 6000 Ω 375 FC i 376 FC ................................ 60 kΩ Rozdzielczość 374 FC ............................................... 0,1 Ω (≤600 Ω) 1 Ω (≤6000 Ω) 375 FC i 376 FC ................................ 0,1 Ω (≤600 Ω) 1 Ω (≤6000 Ω) 10 Ω (≤60 kΩ) Dokładność ............................................. 1% ± 5 cyfr Pojemność Zakres .....................................................