Item Brochure

ManualsBrandsFluke ManualsConstruction Tools1732/1734 3-Phase Electrical Energy Logger

TECHNICAL DATA

Fluke 1732 and 1734

Three-Phase Electrical

Energy Loggers

KEY MEASUREMENTS

Automatically capture and log voltage,

current, power, power factor, energy and

associated values

FLUKE CONNECT

COMPATIBLE*

View data locally on the instrument, via

Fluke Connect mobile app and desktop

software or through your facilities’

WiFi infrastructure.

CONVENIENT INSTRUMENT

POWERING

Power instrument directly from the

measured circuit

HIGHEST SAFETY RATING

IN THE INDUSTRY

600 V CAT IV/1000 V CAT III rated for use

at the service entrance and downstream

Energy logging is now within your reach—discover

where you’re wasting energy, optimize your

facility’s energy use and reduce your bill

The new Fluke 1732 and 1734 Three-Phase Electrical Energy

loggers introduce a new simplicity to discovering sources of

electrical energy waste. Discover when and where energy in your

facility is being consumed; from the service entrance to individual

circuits. Access and share data remotely with your team via the

Fluke Connect

app so you can maintain safer working distances

and make critical decisions in real-time, reducing the need for

protective equipment, site visits and check-ins.

Profiling energy usage across your facility helps you identify

opportunities for energy savings, and provides you with the data

you need to act on them. The new Energy Analyze software pack-

age allows you to compare multiple data points over time to build a

complete picture of energy usage, which is the first step to reduce

the cost of your energy bill.

• Measure all three phases: With included 3 flexible current

probes.

• Comprehensive logging: More than 20 separate logging

sessions can be stored on the instruments. In fact, all measured

values are automatically logged so you never loose measurement

trends. They can even be reviewed during logging sessions and

before downloading for real-time analysis.

• Optimized user interface: Quick, guided, graphical setup

ensures you’re capturing the right data every time, and the

intelligent verification function indicates correct connections

have been made, reducing user uncertainty.

• Bright, color touch screen: Perform convenient in-the-field

analysis and data checks with full graphical display.

• Optimized user interface: Capture the right data every

time with quick, guided, graphical setup and reduce

uncertainty about your connections with the intelligent

verification function.

• Complete “in-the-field” setup through the front panel

or Fluke Connect: No need to return to the workshop

for download and setup or to take a computer to the

electrical panel.

• Fully integrated logging: Connect other Fluke Connect devices

to the Fluke 1734 to simultaneously log up to two other mea-

surement parameters, virtually any parameter available on a

Fluke Connect wireless digital multimeter or module.*

• Energy Analyze Plus application software: Download and

analyze every detail of energy consumption with our automated

reporting.

*Not all models are available in all countries.

Check with your local Fluke representative.

Summary of content (10 pages)

PAGE 1
TECHNICAL DATA Fluke 1732 and 1734 Three-Phase Electrical Energy Loggers Energy logging is now within your reach—discover where you’re wasting energy, optimize your facility’s energy use and reduce your bill The new Fluke 1732 and 1734 Three-Phase Electrical Energy loggers introduce a new simplicity to discovering sources of electrical energy waste. Discover when and where energy in your facility is being consumed; from the service entrance to individual circuits.
PAGE 2
Applications Load studies: Discover how much energy individual pieces of equipment are consuming when they are operating at minimum and maximum capacity. Check capacity of circuits prior to adding additional loads (various standards exist for this process; in the US the NEC 22087 is the recommended standard). Load studies can also identify situations where you may be exceeding the allowable load on the circuit or when an agreed peak demand applies from the utility.
PAGE 3
Applications (continued) Easy to use Power and energy logging: When a piece of equipment is operated it instantaneously consumes a specific amount of power in watts (W) or kilowatts (kW). This power is accumulated over the operating time and expressed as energy consumed in kilowatt hours (kWh). Energy is what your electric utility charges for; there will be a standard charge from the utility per kilowatt hour.
PAGE 4
Analysis and Reporting Capturing logged data is just one part of the task. Once you have the data, you need to create useful information and reports that can be easily shared and understood by your organization or customers. Fluke Energy Analyze Plus software makes that task as simple as possible. With powerful analysis tools and the ability to create customized reports in minutes you’ll be able to communicate your findings and quickly solve problems so you can optimize system reliability and savings.
PAGE 5
Intrinsic uncertainty ± (% of reading + % of range)1 Parameter Influence quantity iFlex1500-12 150A/1500A iFlex3000-24 300A/3000A iFlex6000-36 600/6000A i40s-EL 4A/40A Active Power P Active Energy Ea PF ≥ 0.99 1.2 % + 0.005 % 1.2 % + 0.0075 % 1.7 % + 0.0075 % 1.2 % + 0.005 % Apparent Power S Apparent Energy Eap 0 ≤ PF ≤ 1 1.2 % + 0.005 % 1.2 % + 0.0075 % 1.7 % + 0.0075 % 1.2 % + 0.
PAGE 6
Electrical specifications cont. Standards compliance Power IEEE 1459 Interfaces USB-A File transfer via USB flash drive, firmware updates, max.
PAGE 7
Environmental specifications Operating temperature -10 °C to +50 °C (14 °F to 122 °F) Storage temperature -20 °C to +60 °C (−4 °F to 140 °F), with battery: -20 °C to +50 °C (−4 °F to 122 °F) Operating humidity 10 °C to 30 °C (50 °F to 86 °F) max. 95 % RH 30 °C to 40 °C (86 °F to 104 °F) max. 75 % RH 40 °C to 50 °C (104 °F to 122 °F) max.
PAGE 8
i17xx-flex 1500 12” Flexible Current Probe specifications Measuring range 1 to 150 A ac/10 to 1500 A ac Nondestructive current 100 kA (50/60 Hz) Intrinsic error at reference condition* ± 0.7 % of reading Accuracy 173x + iFlex ± (1 % of reading + 0.02 % of range) Temperature coefficient over operating temperature range 0.05 % of reading/°C, 0.09 % of reading/°F Working voltage 1000 V CAT III, 600 V CAT IV Probe cable length 305 mm (12 in) Probe cable diameter 7.5 mm (0.
PAGE 9
Model features 1732 Energy Logger Model 1734 Energy Logger FLUKE-1732/B FLUKE-1732/ EUS FLUKE-1732/ INTL FLUKE-1734/B FLUKE-1734/ EUS FLUKE-1734/ INTL FLUKE-1734/ WINTL Energy logger basic version Energy logger (EU and US) Energy logger (International) Energy logger with Fluke Connect® Energy logger with Fluke Connect (EU and US) Energy logger (International) Energy logger with Fluke Connect (International wireless) Optional Optional Optional • • • • • • • • • • • Functions Fl
PAGE 10
Ordering information** FLUKE-1732/B Energy Logger, Basic version (excludes current probes) FLUKE-1732/EUS Energy Logger, EU and US version (includes current probes) FLUKE-1732/INTL Energy Logger, International version (includes current probes) FLUKE-1734/B Energy Logger, with Fluke Connect® (excludes current probes) FLUKE-1734/EUS Energy Logger, EU/US with Fluke Connect (includes current probes) FLUKE-1734/INTL Energy Logger, International with Fluke Connect (includes current probes) FLUKE-1734/WINTL Energy