Item Brochure

3 Fluke Corporation Fluke 1732 and 1734 Three-Phase Electrical Energy Loggers
Easy to use
The three current probes are connected separately;
the instrument automatically detects and scales
the probes. The thin current probes are designed
to easily get through tight conductor spacing
and are easily set to 150 or 1500 A for high
accuracy in nearly any application. An innovative
tangle-free flat voltage lead makes connection
simple and reliable and the instrument’s intel-
ligent ‘Verify Connection’ feature automatically
checks to make sure the instrument is connected
correctly and can digitally correct common
connection issues without having to disconnect
measurement leads.
The detachable power supply can be conveniently
and safely powered directly from the measured
circuit—no more searching for power outlets or
having to run multiple extension cords to the
logging location.
Intelligent verification function that digitally corrects most
common measurement connections
Data downloading couldn’t be easier or
more flexible:
• Download directly to a USB flash drive
that plugs directly into the USB port of the
instrument
• View measurements remotely via the Fluke
Connect mobile app and desktop software,
helping you maintain safer working distances
and reducing the need for personal protective
equipment and unnecessary site visits and
check-ins*
• Integrate energy measurement data along with
other plant maintenance data all in one place.
*Not all models are available in all countries. Check with your
local Fluke representative.
Applications (continued)
Power and energy logging: When a piece of
equipment is operated it instantaneously con-
sumes a specific amount of power in watts (W) or
kilowatts (kW). This power is accumulated over
the operating time and expressed as energy con-
sumed in kilowatt hours (kWh). Energy is what
your electric utility charges for; there will be a
standard charge from the utility per kilowatt hour.
Utilities may have other additional charges, such
as peak demand, which is the maximum power
demand over a defined period of time, often 15 or
30 minutes.
There may also be power factor charges, which
are based on the effects of the inductive or
capacitive loads in the facility. Optimizing peak
demand and power factor often results in lower
monthly electricity bills. The 1732 and Fluke
1734 Three Phase Electrical Energy loggers have
the capability to measure and characterize these
effects enabling you to analyze the results and
save money.
Simplified load studies: For situations where
it’s either difficult or impractical to make a volt-
age connection the simple load study feature
allows users to perform a simplified load study by
measuring current only. The user can enter the
nominal expected voltage to create a simulated
power study. For accurate power and energy
studies it is required to monitor both voltage and
current but this simplified method is useful in
certain circumstances.
Simple setup means all available measured
parameters are automatically selected during
logging so you can be sure you have the data
you need, even before you know you need it
Log the most common parameters
Designed to measure the most critical three-
phase power parameters, the 1732 and 1734
can simultaneously log rms voltage, rms cur-
rent, voltage, voltage and current THD, active
power, reactive power, power factor, active
energy, reactive energy, and more. With enough
memory for more than a year of data logging,
the 1732 and 1734 can discover which loads
are can be optimized to enable you to reduce
your energy bill.