Product Manual

1732/1734
Users Manual
42
Currency
The currency symbol used for energy cost values is configurable.
To set the currency:
1. Push .
2. Push  (Instrument Settings).
3. Push  /  to highlight the Currency target and push  or
touch the Currency target.
4. Select one of the currency symbols and push .
5. If a currency is not in the list, select Custom and push  or
touch Edit Custom target.
6. Enter a three-letter currency code with the keyboard and accept
with .
7. Push  to confirm the selection.
Screen Lock
During active logging sessions the user interface can be locked to
protect the Logger from unwanted operation. To lock/unlock the
Logger, a PIN is required. The default PIN is 1234.
To set up a new PIN:
1. Push .
2. Push  (Instrument Settings).
3. Push  /  to highlight the Lock PIN target and push or touch
the Lock PIN target.
4. Enter the old PIN. If the PIN has not been changed before, use
the default PIN 1234.
5. Enter the new PIN. The PIN can have up to 8 digits. An empty
PIN is also supported.
Note
Contact your local Fluke office for a master PIN in the case of
a lost or unknown PIN. You will need the Product serial
number and date shown on the screen to request a master
PIN.
Status Information
The screen provides information and status about the Logger, such as
the serial number, attached current probes, battery status, and
installed licenses.
To go to the status information:
1. Push .
2. Push  (Instrument Settings).
3. Push  (Info).
4. Push  to exit the screen.
Firmware Version
To find the firmware version installed on your Logger:
1. Push .
2. Push  (Instrument Settings).
3. Push  (Info).
4. Push  (Firmware Version).
5. Push  to exit the screen.
Installed Licenses
To show the list of installed licenses:
1. Push .
2. Push  (Instrument Settings).
3. Push  (Info).
4. Push  (Licenses).
All installed licenses are listed on the screen.
5. Push  to exit the screen.