Product Manual

1732/1734
Users Manual
44
Reset to Factory Defaults
The reset function deletes all user data, such as logging sessions and
screen captures. It also deletes the WiFi access point connection
credentials, and sets the instrument settings to default values. It also
enables the first-time use wizard the next time the instrument restarts.
To re s e t :
1. Push .
2. Push  (Instrument Settings).
3. Push  (Tools).
4. Push  /  to highlight Reset to Factory Defaults and push
 or touch Reset to Factory Defaults target.
A display message prompts you to continue or cancel the reset.
Note
A reset to factory defaults from the Instrument Settings menu
does not affect the licenses installed on the Logger.
The Logger is reset to factory defaults also when you simultaneously
push and hold the buttons
, , and  while the Logger
starts.
Caution
The "3-button" reset to factory defaults removes all
licenses installed on the Logger. You must reinstall any
purchased license.
Firmware Update
To update:
1. On a USB flash drive with at least 80 MB of free space available,
create a folder called "Fluke17x" (no spaces in file name).
Note
Make sure the USB flash drive is formatted with FAT or
FAT32 file system. In Windows, USB flash drives ≥32GB can
be formatted with FAT/FAT32 only by using 3rd party tools.
2. Copy the firmware file (*.bin) into this folder.
3. Make sure the Logger is powered from mains and turned on.
4. Plug the flash drive into the Logger. The USB Transfer screen
pops up and offers the firmware update.
5. Push  /  to select the firmware update and push .
6. Follow the instructions. When the firmware update is complete
the Logger restarts automatically.
Note
A firmware update deletes all user data such as
measurement data and screen captures.
This firmware update works only when the firmware version on the
USB flash drive is newer than the installed version.
To install the same version or an older version:
1. Push .
2. Push  (Instrument Settings).
3. Push  (Tools).
4. Push  /  to select Firmware Update and push  or touch
the Firmware Update target.
Note
If more than one firmware file (*.bin) is located in the
\Fluke173xfolder, the newest version is used for the update.