Product Manual
Energy Logger
Safety Information
3
•
Do not exceed the Measurement Category (CAT) rating
of the lowest rated individual component of a Product,
probe, or accessory.
•
Keep fingers behind the finger guards on the probes.
•
Do not use a current measurement as an indication
that a circuit is safe to touch. A voltage measurement is
necessary to know if a circuit is hazardous.
•
Do not touch voltages >30 V ac rms, 42 V ac peak, or
60 V dc.
•
Do not apply more than the rated voltage, between the
terminals or between each terminal and earth ground.
•
Measure a known voltage first to make sure that the
Product operates correctly.
•
De-energize the circuit or wear personal protective
equipment in compliance with local requirements
before you apply or remove the flexible current probe.
•
Remove all probes, test leads, and accessories before
the battery door is opened.
•
Do not use USB accessories when the Product is
installed in environment with wires or exposed metal
parts with hazardous live voltage such as in cabinets.
•
Do not operate the touch screen with sharp objects
•
Do not use the Product if the protection film on the
touch panel is damaged.
•
Do not touch the metal parts of one test lead when the
other is still connected to hazardous voltage.
Table 1 is a list of symbols used on the Product or in this manual.