User manual

Industrial ScopeMeter®

Get Started

Before you use your Test Tool for the first time, read this

section.

Battery Pack

Li-ion batteries may be discharged at delivery. Completely

discharged batteries can cause the Test Tool not to start

up when it is turned on. To reach full charge, charge for 4

hours with the Test Tool turned off.

When fully charged, the batteries provide up to 7 hours

(single channel, time base slower than 1 µs/div) of use

when the backlight is dimmed.

The battery status shows as an icon in the top right

corner of the screen:

b - full charge

 - about 5 minutes of operation remains

To charge the batteries and power the instrument, connect

the power adapter as shown in Figure 2. To charge the

batteries more quickly, turn off the Test Tool.

W Caution

To prevent overheating of the batteries

during charging, do not exceed the allowable

ambient temperature in the specifications.

Note

The power adapter does not damage the Test

Tool even when connected over consecutive

days. The power adapter automatically switches

to a trickle charge.

hxv51.eps

Figure 2. Battery Charging