Item Brochure

ManualsBrandsFLUKE ManualsTest & MeasurementHandheld multimeter digital 787B Calibrated to: Manufacturer standards Current draw reading CAT III 1000 V, CAT IV

Included accessories

Fluke-789 ProcessMeter:

TL71 Premium Safety-Designed

Test Lead Set plus alligator clips,

4 AA alkaline batteries (installed),

product overview and users manual

(CD-ROM) in 14 languages.

Fluke-787 ProcessMeter:

Protective Yellow Holster with test

lead storage, TL75 Safety-Designed

Test Lead Set plus alligator clips,

one 9V alkaline battery (installed),

product overview and users manual

(CD-ROM) in 14 languages.

Ordering information

Fluke-7

ProcessMeter

Fluke-7

7 ProcessMeter

Fluke 787 and 789

ProcessMeter

™

Test Tools

Safety rated multimeters with mA source

Specifications – 787 and 789 ProcessMeter

ecommended accessories – 787 and 789 ProcessMeter

In-field valve positioner checks:

Application note

(Literature code 2041342)

Valve positioners

open and close

with a 4 to

20 mA signal

applied. This

application note

explains how to

adjust these

valves so they

open and close

correctly.

Want to read

more? Download

this and other application note

at www.fluke.com/library

Measurement Function Best Accuracy Range and Resolution (% of reading + LSD)

V dc

400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1

000 V

1 % + 1

V dc (true-rms) 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V 0.7 % + 2

mA dc 30.000 mA .05 % + 2

A dc 1.000 A (0.440 A continuous) 0.2 % + 2

A ac 1.000 A (0.440 A continuous) 1 % + 2

Resistanc

e 400.0

Ω,

4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M 0.2 % + 1

Frequenc

y (0.5 Hz to 20 kHz)

99.99 Hz, 1999.9 Hz, 19.999 kHz .005 % + 1

Diode Test

789: 2.000 V (shows diode voltage drop) 2 % + 1

787: 2.400 V (shows diode voltage drop) 2 % + 1

Continuity Beeps for resistance < approx. 100 ohms

Drive Accuracy

Output Function Range and Resolution Capability (% of span)

DC current output 0.000 to 20.000 mA or 4.000 to 20.000 mA 789: 24 V .05 %

(Internal battery operation) (selectable at power-up) Over-range to 24.000 mA compliance or,

1,200 Ohms, @ 20 mA

787: 12 V .05 %

compliance or,

500 Ohms, @ 20 mA

C current simulate

0.000 to 20.000 mA or 4.000 to 20.000 mA,

000 Ohms,

.05 %

(Ext

. 24 V

olt loop supply) (selectable at power-up) Over-range to 24.000 mA @ 20 mA

24 V loop supply

789: Minimum 24 V 250 Ohms > 24 V

87:

not a

vailable @ 20 mA

Current adjustment modes

Manual: Coarse, Fine, 25 % and 1

00 % step (

00 % step 7

89 only)

Automatic: Slow Ramp, F

ast Ramp, 25 % step

emperature range of 1

°C to 28 °C, for one year after calibration

Maximum voltage applied between any jack and earth ground:1000 V rms Storage temperature: -40 °C to 60 °C

Operating temperature: -20 °C to 55 °C Relative humidity: 95 % up to 30 °C; 75 % up to 40 °C; 45 % up to 50 °C; 35 % up to 55 °C

Safety: Designed in accordance with EN61010, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No. 1010.1-92 Over-voltage CAT III

Size (HxWxL)/weight (787 with holster): 52 mm x 98 mm x 201 mm (2.06 in x 3.86 in x 7.93 in)/638 g (1.4 lbs)

Size (HxWxL)/weight (789): 50 mm x 100 mm x 203 mm (1.97 in x 3.94 in x 8.00 in)/600 g (1.3 lbs)

Fluke 789 ProcessMeter

With the Fluke 789 ProcessMeter, process technicians

can do a lot more while carrying a lot less.

Key Fluke 789 features:

• 24 V loop power supply

• HART mode setting with loop power

(adds 250 ohm resistor)

• Double-sized, dual display

• 20 mA drive into 1200 ohms

• Backlight with two brightness settings

• 0 to 100 % mA Span Check buttons to toggle between

4 and 20 mA

• Infrared I/O serial port compatible with FlukeView

Forms Software

• Improved battery power with four AA batteries

• CAT IV 600 V safety-rated

• Plus all the proven 787 features

Fluke 787 ProcessMeter

• Simultaneous mA and % of scale readout on mA output

• 25 % Manual Step plus Auto Step and Auto Ramp on

mA output

• Min/Max/Average/Hold/Relative modes

• Externally accessible battery for easy changes

• CAT III 1000 V safety-rated, true-rms multimeter

TL220 ToolPak 80T-150U C125 PV350

SureGrip Industrial

Meter Hang

ing K

Universal

Meter Case

Pressure V

acuum Module

est L

ead Set

e page 55

emperature Prob

e page 54

e page 4

See page 45 See page 53

or more information and detailed specifications, go to www.fluke.com/processmeters

Fluke 787

Fluke 789

600V

CAT IV

Designed and

Conforms to

IEC 1010-1

(Fluke 789 only)

Summary of content (6 pages)

PAGE 1
Fluke 787 and 789 ProcessMeter Test Tools ™ Safety rated multimeters with mA source Fluke 789 ProcessMeter With the Fluke 789 ProcessMeter, process technicians can do a lot more while carrying a lot less.
PAGE 2
TECHNICAL DATA Fluke 787B and 789 ProcessMeter™ Double the troubleshooting power so you can do more, while carrying a lot less The Fluke 787B and 789 ProcessMeter™ double troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Whether you only need to source and simulate mA, or need a 24V loop power supply, Fluke has a ProcessMeter™ test tool designed specifically to meet your needs.
PAGE 3
Measurement function Range and resolution Best accuracy (% of reading + LSD) V dc 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V 0.1 % + 1 V ac (true-rms) 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V 0.7 % + 2 mA dc 30.000 mA .05 % + 2 A dc 1.000 A (0.440 A continuous) 0.2 % + 2 A ac 1.000 A (0.440 A continuous) 1%+2 Resistance 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M 0.2 % + 1 Frequency (0.5 Hz to 20 kHz) 199.99 Hz, 1999.9 Hz, 19.999 kHz .005 % + 1 Diode test 2.
PAGE 4
Preventive maintenance simplified. Rework eliminated. Ordering information 789 ProcessMeter 787B ProcessMeter Save time and improve the reliability of your maintenance data by wirelessly syncing measurements using the Fluke Connect® system. • Eliminate data-entry errors by saving measurements directly from the tool and associating them with the work order, report or asset record. • Maximize uptime and make confident maintenance decisions with data you can trust and trace.
PAGE 5
Fluke Connect 789 ProcessMeter/ Temp Kit Technical Data Now compatible with Fluke Connect™ Mobile App Double your power. The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter.
PAGE 6
These 787 features are also included in the 789 • DMM designed to meet 1000 volt IEC 1010 CAT III standards • Precision 1000 V, 440 mA true-rms digital multimeter • Frequency measurement to 20 kHz • Min/Max/Average/Hold/ Relative modes • Diode test and continuity beeper • Simultaneous mA and % of scale readout • 20 mA dc current source/loop calibrator/ simulator • Manual step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp • Externally accessible battery for easy battery changes Measurement functi