User's Manual

572-2
Users Manual
6
Save
To save readings:
1. Pull the trigger to take a measurement.
2. Release the trigger to stop taking the measurement.
3. Push the Save softkey to enter the Save menu.
4. Push the Yes softkey to save the reading.
The reading is assigned a memory location and a time and date stamp.
The reading includes:
• IR temperature
• Emissivity
• Date/Time
You can also push the Cancel softkey to abort saving the reading.
Light
The Product has a backlit display with two brightness levels. The Light softkey is
used to adjust the backlight brightness. The backlight is on each time the trigger is
pulled.
To toggle the backlight brightness, push the Light softkey.
The backlight can be disabled using the Setup menu. See “Setup” for more
information.
Memory
The Product can store measurement records including time, date, emissivity, and
measurement record numbers (see “Save” for more information). The Product can
store 99 records.
To access records stored in memory:
1. Push the Menu softkey until Mem shows as the left softkey function.
2. Push the Mem softkey to access the Memory menu. Saved readings can be
read.
Emissivity Menu
The Emissivity menu includes a list of pre-defined materials and lists their typical
emissivity values, see Table 3. For further information, see “Emissivity”.
Note
Default emissivity is 0.95.
To access the Emissivity menu:
1. Push the Menu softkey until  (emissivity) shows as the right softkey function.
2. Push the  softkey.