59 MAX/59 MAX + Infrared Thermometer Users Manual PN 4311999 March 2013 © 2013 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks of their respective companies.
LIMITED WARRANTY AND LIMITATION OF LIABILITY This Fluke product will be free from defects in material and workmanship for one year from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke’s behalf.
Table of Contents Title Page Introduction ................................................................................................................. 1 How to Contact Fluke ................................................................................................. 1 Safety Information ...................................................................................................... 2 Maintenance ...............................................................................................
59 MAX/59 MAX + Users Manual ii
Introduction The Fluke 59 MAX and 59 MAX + Infrared Thermometers (the Product) can determine the surface temperature by measuring the amount of infrared energy radiated by the target’s surface. Warning Read all safety information before you use the Product.
59 MAX/59 MAX + Users Manual Or, visit Fluke's website at www.fluke.com. To register your product, visit http://register.fluke.com. To see, print, or download the latest manual supplement, visit http://us.fluke.com/usen/support/manuals. Safety Information A Warning identifies conditions and procedures that are dangerous to the user. A Caution identifies conditions and procedures that can cause damage to the Product or the equipment under test.
Infrared Thermometer Safety Information • • • • • • • See emissivity information for actual temperatures. Reflective objects result in lower than actual temperature measurements. These objects pose a burn hazard. Do not look directly into the laser with optical tools (for example, binoculars, telescopes, microscopes). Optical tools can focus the laser and be dangerous to the eye. Do not look into the laser. Do not point laser directly at persons or animals or indirectly off reflective surfaces.
59 MAX/59 MAX + Users Manual Table 1. Symbols Symbol 4 Meaning Symbol Meaning Risk of danger. Important information. See Manual. Conforms to relevant North American Safety Standards. Warning. Laser. Conforms to European Union directives. Battery Conforms to relevant Australian standards. This product complies with the WEEE Directive (2002/96/EC) marking requirements.
Infrared Thermometer Maintenance Maintenance Warning To prevent possible electrical shock, fire, or personal injury, have an approved technician repair the Product. Caution To avoid damage to the Product, do not leave the thermometer on or near objects of high temperature. How to Change the Battery To install or change the AA IEC LR06 battery, open the battery compartment and replace the battery as shown in Figure 16.
59 MAX/59 MAX + Users Manual Specifications 59 MAX Temperature Range Accuracy (Calibration geometry with ambient temperature 23 °C ±2 °C) Response Time (95 %) Spectral Response Emissivity 6 59 MAX + -30 °C to 350 °C (-22 °F to 662 °F) -30 °C to 500 °C (-22 °F to 932 °F) ≥0 °C: ±2.0 °C or ±2.0 % of reading, whichever is greater (≥32 °F: ±4.0 °F or ±2.0 % of reading, whichever is greater) ≥0 °C: ±1.5 °C or ±1.5 % of reading, whichever is greater (≥32 °F: ±3.0 °F or ±1.
Infrared Thermometer 8:1 10:1 (calculated at 90 % energy) (calculated at 90 % energy) Display Resolution 0.1 °C (0.2 °F) ±1.0 % of reading or ±1.0 °C ±0.8 % of reading or ±1.0 °C Repeatability (% of reading) (±2.0 °F), whichever is (±2.0 °F), whichever is greater greater Power 1 AA IEC LR06 Battery Battery Life 12 hours with laser and backlight on Weight 220 g (7.76 oz) Size (156 x 80 x 50) mm (6.14 x 3.
59 MAX/59 MAX + Users Manual Standards and Agency Approval Ingress Protection Rating ........................ IP40 per IEC 60529 Vibration and Shock ................................ IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms Compliance ............................................. EN/IEC 61010-1 Laser Safety ............................................ FDA and EN 60825-1 Class II Electromagnetic Compatibility .................
Infrared Thermometer Nominal Surface Emissivity Nominal Surface Emissivity Material Value Material Value Default**** 0.95 Glass (plate) 0.85 Aluminum* 0.30 Iron* 0.70 Asbestos 0.95 Lead* 0.50 Asphalt 0.95 Oil 0.94 Brass* 0.50 Paint 0.93 Ceramic 0.95 Plastic** 0.95 Concrete 0.95 Rubber 0.95 Copper* 0.60 Sand 0.90 Food - Frozen 0.90 Steel* 0.80 Food - Hot 0.93 Water 0.93 Wood *** 0.
59 MAX/59 MAX + Users Manual The Product 1 2 hdi01.
Infrared Thermometer The Product 3 4 / 5 5 6 Max/Min/Avg/Diff hdi14.
59 MAX/59 MAX + Users Manual 7 10 min OFF hdi16.
Infrared Thermometer The Product 8 10 0 ºC 32 ºF 9 30 Min 11 12 9 3 6 22 ºC 72 ºF 125 °F hdi15.
59 MAX/59 MAX + Users Manual 12 13 40 mm @ 300 mm 75 mm @ 600 mm 38 mm @ 300 mm 120 mm @ 900 mm 60 mm @ 600 mm 100 mm @ 900 mm S S 1.6" @ 12" 3" @ 24" 4.7" @ 36" 1.5" @ 12" 2.4" @ 24" 4" @ 36" D D 59 MAX D:S = 8:1 59 MAX + D:S = 10:1 hdi08.
Infrared Thermometer The Product 14 70 21 hdi03.
59 MAX/59 MAX + Users Manual 15 75° 225° 75° hdi04.
Infrared Thermometer The Product 16 17 hdi13.
59 MAX/59 MAX + Users Manual 18
