Safety Information 700G Series Pressure Gauge PN 4098606 November 2011 © 2011 Fluke Corporation. All rights reserved. Printed in USA. All product names are trademarks of their respective companies.
LIMITED WARRANTY AND LIMITATION OF LIABILITY This Fluke product will be free from defects in material and workmanship for three years from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke’s behalf.
Safety Information • A Warning identifies conditions and procedures that are dangerous to the user. A Caution identifies conditions and procedures that can cause damage to the Product or the equipment under test. Read all safety Information before you use the Product. • Do not use the Product in damp or wet environments. • Batteries must only be changed in an area known to be non-hazardous. Explosion hazard. • Do not use the RS-232 interface in hazardous areas.
700G Series Safety Information Hazard Location Information/Approvals Ex Hazardous Areas An Ex-hazardous area as used in this manual refers to an area made hazardous by the potential presence of flammable or explosive vapors. These areas are also referred to as hazardous locations, see NFPA 70 Article 500. ) ( 2 ® LR110460 Class I, Div. 2, Groups A-D II 3 G Ex nA IIB T6 KEMA 06ATEX0014 X Ta=–10 °C...
Pressure Gauge Safety Information Symbols Symbols used on the Product and in this manual are explained in Table 1. Table 1. Symbols Symbol Meaning Symbol Meaning W Risk of danger. Important information. See manual. P Conforms to European Union directives. X Hazardous voltage. Risk of electrical shock. ) Conforms to relevant North American Safety Standards. f Pressure ~ Do not dispose of this product as unsorted municipal waste. Go to Fluke’s website for recycling information.
700G Series Safety Information How to Contact Fluke To contact Fluke, call one of the following telephone numbers: • Technical Support USA: 1-800-44-FLUKE (1-800-443-5853) • Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853) • Canada: 1-800-36-FLUKE (1-800-363-5853) • Europe: +31 402-675-200 • Japan: +81-3-6714-3114 • Singapore: +65-738-5655 • Anywhere in the world: +1-425-446-5500 Or, visit Fluke’s website at www.fluke.com. To register your product, visit http://register.fluke.com.
