User's Manual

712B/714B
Calibration Manual
26
Adjust 50 Ω Input
1. Set the 5522A to output 50 Ω.
2. Wait approximately 10 seconds for a stable output of the 5522A.
3. Confirm the reading on the 712B.
hwp10.jpg
Adjust 350 Ω Input
1. Push  on the 712B to enter 350 Ω input calibration mode.
2. Set the 5522A to output 350 Ω.
Wait approximately 10 seconds for a stable output of the 5522A.
3. Confirm the reading on the 712B.
hwp11.jpg