User's Manual

ManualsBrandsFluke ManualsCalibratorsFluke 714B

Manual Supplement

Manual Title: 714B Users Supplement Issue: 4

Part Number: Web-Only Issue Date: 4/15

Print Date: January 2014 Page Count: 3

Revision/Date:

This supplement contains information necessary to ensure the accuracy of the

above manual.

Summary of content (4 pages)

PAGE 1
Manual Supplement Manual Title: 714B Users Part Number: Web-Only Print Date: January 2014 Revision/Date: Supplement Issue: Issue Date: Page Count: 4 4/15 3 This supplement contains information necessary to ensure the accuracy of the above manual. © 2014-2015 Fluke Corporation. All rights reserved..
PAGE 2
714B Users Manual Supplement Change #1, 67532 On page 4, add the following to the Symbols table:  Conforms to relevant South Korean EMC Standards. On page 33, under General Specifications add: Electromagnetic Compatibility .. Applies to use in Korea only. Class A Equipment (Industrial Broadcasting & Communication Equipment. This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take notice of it.
PAGE 3
Manual Supplement 714B Users Change #2, 96 On page 13, following the Auto Backlight-Off, add: External CJC The Product provides an external CJC option. This option lets you replace the internal CJC with an external cold junction compensation. To enable External CJC mode: 1. Push . 2. When SHIFT shows on the screen, push . 3. In the displayed setting list, highlight the External CJC option. Use to select the option. To disable External CJC mode: 1. Push . 2. When SHIFT shows on the screen, push .
PAGE 4
714B Users Manual Supplement Change #3, 487 On page 33, replace Electromagnetic Environment with: Electromagnetic Environment IEC 61326-1, Portable FCC: CFR Title 47, Part 15, Subpart B Change #4, 138 On page 25, Table 7, replace item 9 with:  4/15 LCD mask 4307135 1 3