User's Manual

Supplement

Title: 700PEx I.S. Supplement Issue: 4

Part Number: 2106534 Issue Date: 8/10

Print Date: May 2004 Page Count: 2

Revision/Date:

This supplement contains information necessary to

ensure the accuracy of the above Instruction Sheet.

PAGE 1
Supplement Title: 700PEx I.S. Supplement Issue: 4 Part Number: 2106534 Issue Date: 8/10 Print Date: May 2004 Page Count: 2 Revision/Date: This supplement contains information necessary to ensure the accuracy of the above Instruction Sheet. © 2004-2010 Fluke Corporation. All rights reserved. Printed in the U.S.A.
PAGE 2
700PEx Instruction Sheet Manual Supplement Change #1 Under Product Compliance Markings, change the following: Replace: P ( II 1 G Eex ia IIC T4 0344 With: P ( II 1 G EEx ia IIC T4 0344 KEMA 04ATEX1102 X Replace: Ex Certification by Mensor Corporation, San Marcos, TX USA With: Manufactured by Mensor Corporation, 201 Barnes Drive, San Marcos, TX USA 78666 Change #2 Under Product Compliance Markings, add the following: ; Conforms to Australian directives.
PAGE 3
Manual Supplement 700PEx Instruction Sheet Change #3 Under Safety Information, add the following to the Warning section: • Entity parameters for intrinsic safety can be found in Table 3. Under Faults and Damage, add the following to the Warning section: • Substitution of components may impair intrinsic safety. Change #4 Replace the Box Contents with: Box Contents Each pressure module comes with an installed strap and instruction sheet.