User's Manual

ManualsBrandsFluke ManualsCalibratorsFluke 719

Manual Supplement

Manual Title: 719 Users Supplement Issue: 3

Print Date: August 2008 Issue Date: 1/14

Revision/Date: Page Count: 3

This supplement contains information necessary to ensure the accuracy of the above manual. This

manual is distributed as an electronic manual on the following CD-ROM:

CD Title: 719

CD Rev. & Date: 8/2008

CD PN: 3316449

Summary of content (4 pages)

PAGE 1
Manual Supplement Manual Title: Print Date: Revision/Date: 719 Users August 2008 Supplement Issue: Issue Date: Page Count: 3 1/14 3 This supplement contains information necessary to ensure the accuracy of the above manual. This manual is distributed as an electronic manual on the following CD-ROM: CD Title: CD Rev. & Date: CD PN: © 2008-2014 Fluke Corporation. All rights reserved.
PAGE 2
719 Users Manual Supplement Change #1, 48042 and 49682 On page 26, replace the Pressure Sensor Input and the DC mA Measure and Source tables with the following: Pressure Sensor Input Model Range Resolution Accuracy [1] Max Non-destructive Pressure 30G -12 to 30.0 psi 0.001 0.025 % of Range (6 month calibration) 60 psi 100G -12 to 100.0 psi 0.01 0.035 % of Range (1 year calibration) 200 psi Temperature coefficient: 0.
PAGE 3
Manual Supplement 719 Users DC mA Measure and Source Range 24 mA Accuracy (% of Reading + Counts) [1] Resolution 0.001 mA 0.015 + 2 Maximum load on mA source is 1000 . With HART resistor on, maximum load is 750 . Fuseless overload protection Temperature coefficient: 0.005 % of range per C for temperature ranges -10 C to 18 C and 28 C to 55 C [1] In an RF field of 1V/m to 3V/m and between the frequencies of 150 MHz to 250 MHz, add 75 counts to specified accuracy.
PAGE 4
719 Users Manual Supplement Change #3, 67400 On page 4, under Table 1, add:  Conforms to relevant South Korean EMC Standards. On page 27, under General Specifications, add: Electromagnetic Compatibility ..... Applies to use in Korea only. Class A Equipment (Industrial Broadcasting & Communication Equipment) [1] [1] This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take notice of it.