Brochure

Page 1 of 2, Document #3023
725 Multifunciton Calibrator
©2000 Fluke Corporation
Rev. C-7/2000
Simultaneous Function Capability Channel A Channel B
24.000 mA DC M M or S
24.000 mA DC with 24V loop supply M
100.00 mV DC M or S
30.000V DC Measure M
20.000V DC Measure 10.000V DC Source M or S
15 to 3200 Ohms M or S
Thermocouple J, K, T, E, R, S, B, L, U, N M or S
RTD Ni120; Pt100 (392); Pt100 (JIS);
Pt100, 200, 500, 1000 (385) M or S
Pressure (requires Fluke 700PXX Modules) M M used as S
Frequency; Squarewave, 1 CPM to10 kHz;
fixed amplitude 5V p-p M or S
Fluke 725 Multifunction
Calibrator
Simply Powerful!
The new Fluke 725 Multifunction Process
Calibrator is a powerful yet easy-to-use field
calibrator. Use the measure and source functions
to test and calibrate almost any process
parameter.
•
Small, streamlined shape makes it easy
to carry
•
Rugged, reliable design stands up to field use
•
Easy to read measure/source screen lets you
view input and output simultaneously
•
Measure volts, mA, RTDs, thermocouples,
frequency, and ohms to test sensors and
transmitters
•
Source/simulate volts, mA, thermocouples, RTDs,
frequency, and ohms to calibrate transmitters
•
Measure/source pressure using any of 28
Fluke 700Pxx Pressure Modules
•
Source mA with simultaneous pressure
measurement to conduct valve and I/P tests
•
Support flow meter testing with frequency
and CPM functions
•
Perform fast linearity tests with auto step and
auto ramp features
•
Power transmitters during test using loop
supply with simultaneous mA measurement
•
Store frequently-used test setups for later use
•
Backlight lets you work in poor light
•
Remote interface allows benchtop automated
operations
•
Large battery capacity of four AA cells
•
Battery door for easy changes
Ordering information
Fluke 725 Multifunction Process Calibrator
Each calibrator includes: TL75 Test Leads, AC70A Test
Clips, one pair of stackable test leads, Users Manuals
appropriate to country of destination (English, plus three
of: French, German, Spanish, Italian, Dutch, Norwegian,
Danish, Swedish, Finnish, Portuguese, Korean, Chinese,
and Japanese), Statement of Quality Assurance Practices;
CE and CSA markings.
V mA
LOOP
100%
25%
25%
RECALL
C / F
MEAS
SOURCE
STORE
SETUP
TC
RTD
V mA
PROCESS CALIBRATOR
MULTIFUNCTION
725
0%
M = Measure S = Source/Simulate
Fluke. Keeping your world
up and running.