User's Manual

C-1
Appendix C
List of Known Bugs
Fluke Bug
Number
Bug Description Comments
8066 Test Equipment Report (TER) is
incomplete.
TER does not print all existing results.
7890 Incorrect Base Values when results are
unloaded from the calibrator.
7894 Base Input/Output Values do not appear
in test report.
7907 Failure to check for availability of disk
space before installation begins.
Fails to install when there is less than 20
MB of available space. Error message
appears after 75% of installation is
complete.
7973 Calibrator Load Report does not get
printed when procedure is loaded in to
Calibrator for the second time.
Loaded a procedure into the Calibrator,
then changed test setup, and loaded the
same procedure again. The Calibrator
Load Report will not be printed.
7868 Sorting for more than one criteria is
incorrect when the first criteria is blank.
Records with the first criteria blank will
not be sorted on the second criteria.
7818 Drift Plot does not work correctly with
binary test results.
You cannot do a Drift Plot on binary test
results.