User's Manual
DPC/TRACK
Users Manual
1-10
Requirements
Successful installation and operation of DPC/TRACK requires the following
software and hardware.
• IBM® compatible 486- based computer (586 or higher recommended)
• 8MB RAM required (16MB or more recommended)
• Microsoft® Windows™ Version 3.1 or later (or Windows 95)
• MS-Windows compatible pointing device
• MS-DOS® Version 5.0 or later
• 20MB hard disk space, plus approximately 3KB per record
• 500k or larger RAM drive (recommended)
• Graphics monitor and card (VGA color or better recommended)
• For calibrator communication:
∗ RS232 serial asynchronous communication port
∗ compatible calibrator (see Appendix B, “Fluke Calibrators”)
∗ suitable communications cable (supplied)
Of course, a good understanding of the instrument calibration and maintenance
procedures employed at your plant will also prove helpful.