User's Manual

Overview
Installation
1
1-13
(Select the OK button to activate your command.)
• If you are running Windows 95:
Select the Start button, then choose Run…, then type
D:\English\Setup - if you want to install English version of the DPC/TRACK
D:\ Deutsch\Setup - if you want to install German version of the DPC/TRACK
D:\ Espanol\Setup - if you want to install Spanish version of the DPC/TRACK
D:\ Francais\Setup - if you want to install French version of the DPC/TRACK
D:\ Italiano\Setup - if you want to install Italian version of the DPC/TRACK
(Select the OK button to activate your command.)
2. You will be asked to specify which directory will contain the DPC/TRACK
executable files. The default directory will be C:\DPCTRACK. You may
accept the default or specify a different directory. A subdirectory called DATA
(to contain you database files) is created under the specified executable
directory. Another subdirectory called UPGRADES (to contain firmware
upgrades for specific calibrators) is also created.
3. To aid system performance, you may be asked to specify the drive letter of
your RAM drive. If you do not have a RAM drive or do not know the
associated drive letter, type nothing and simply select the Next button.
Note
If a message appears stating that there is not enough disk space,
select the Cancel button to abort installation, delete enough files to
free up at least 20MB of disk space, and start over.
As the installation progresses, the status bar dynamically indicates the
installation progress of the entire installation procedure.
4. You can now start your DPC/TRACK program. Go directly to the online help
by clicking on the help icon.
Note
If for any reason your computer “freezes” during the installation of
the DPC/TRACK you will need to remove the following files:
• Windows Directory: _delis43.ini
• Tmp directory: _ins0433.mp, _inz0433.mp and subdirectory:
_istmp0.dir
• DPC/TRACK directory and all subdirectories.
Repeat the installation procedure.