User's Manual

DPC/TRACK Essentials
Introduction
2
2-3
Introduction
This chapter is broken down into the following sections:
• Starting the Program
• The Main Menu
• Tutorial: Learning the Basics
• About the Interface
Starting the Program
To start DPC/TRACK, double-click on the DPC/TRACK icon located in the
DPC/TRACK Group. (Multiple instances of DPC/TRACK may not be run
concurrently on the same machine.)
Logging In
Upon starting DPC/TRACK, you will receive a login screen (after viewing the
About DPC/TRACK screen).
DPC/TRACK includes four predefined User IDs: Admin, Key User, Tester, and
Visitor. Additional users cannot be added. All DPC/Track users must be assigned
to one of the predefined User ID levels and use the passwords for the users.
The following is a list of the included User IDs and their descriptions:
Admin
The Admin (Administrator) has full access to all areas of DPC/TRACK.
Most notably, the Admin has the ability to perform administrative
responsibilities, such as backing up data, rebuilding indexes, performing
diagnostics, and modifying setup options, among other tasks. Typically, only
one person should serve as the Admin of the DPC/TRACK program. The
User ID and default password for the Admin is Admin.
Key User
The access rights of the Key User differ from those of the Admin in that a
Key User cannot perform administrative tasks. Otherwise, the Key User has
full access to all areas of DPC/TRACK. The User ID and default password
for the Key User is Key User.