User's Manual

DPCTrack2
Users Manual
20-6
Example: An Import is performed that creates 40 Instruments each with 3
calibration results. Your log file indicates that 3 calibration results for the
same Instrument ID were not imported because the “ID Does Not Exist in
the Database”. If you manually create the Instrument ID and run the
import again, there will be no change to the previously imported Instrument
records but 3 additional calibration results will be created for the original
Instruments.
Note
If the Instrument record already exists in DPCTrack2, the import will NOT
update the record.
Note
The following records will not be migrated into DPCTrack2 from
DPCTrack files
• Instrument Records with no Tag ID
• Instrument Records with a Tag ID longer than 32 characters
• Instrument Records with duplicate Tag IDs (first one will be
migrated, subsequent ones will be kicked out)
• History Records with a blank Tag ID
• History Records that do not have a corresponding Instrument
record in the database
• History Records that are not one of the following types:
o 74x Binary
o Manual Binary
o Manual Analog
o 702 Analog
o 74x Analog
o 74x Logged Data