User's Manual

DPCTrack2
Users Manual
26-4
26.3 Troubleshooting - Uploading Results
Possible uploading problems:
• If the Tag used for a result stored on the calibrator is not found in the Instrument
or Loop screens, the user will be prompted to save the result to a file. To avoid
this, create an Instrument or Loop record with an ID matching the Tag entered on
the Calibrator before uploading.
• Remember that after Authorizing a calibration during Upload, the user may
review and update the Calibration record in the Calibration Screen if there are
additional values to view, edit, or remove from the record.