User's Manual

DPCTrack2
Users Manual
3-6
3.7.4.1 Downloading Tasks
There are several methods to choose from to generate a list of Tags to download. Before
initiating the download, connect the calibrator to the serial port and turn the calibrator on.
Your calibrator information should display in the “Calibrator Info” section of the
Upload/Download screen. If the information is not displayed, click the Refresh button.
See Figure 3.2. Select the tags you wish to download and then select the “Initiate
Download” button. After the download process is complete, perform the test with the
calibrator.
Figure 3.2
3.7.4.2 Uploading Results
To Upload results to DPCTrack2, make sure the calibrator is connected and powered on,
then select the “Initiate Upload” button. You will be required to authorize the results
before they will be added to DPCTrack2.
3.7.5 Reports
After uploading the test results, you can then view your results within DPCTrack2. To
review your results, select the Reports menu in the Home Screen or view the Calibration
record for the instrument by selecting the Calibration button and selecting the instrument
you wish to preview.