Data Sheet

It’s easy to calibrate and maintain HART instrumentation with one powerful tool.

With the 754 DPC, you can:

• Generate precision electrical, temperature, or

pressure signals for analog stimulus or sensor

simulation.

• Simultaneously measure electrical, temperature,

or pressure signals from transmitter output.

• Determine type, manufacturer, model, tag ID by

interrogating HART devices.

• Read HART PV function and smart transmitter

digital output while measuring analog mA output.

• Read and write HART conﬁguration functions to

make ﬁeld adjustments to PV range points, damping,

and other top-level conﬁguration settings.

• Change sensor conﬁguration on supported

temperature transmitters.

• Re-label smart transmitters by reading and writing

HART tag and message ﬁelds.

• Clone additional transmitters by reading and

storing basic HART conﬁgurations.

• Perform automated HART sensor trim and output

trim for selected devices in conjunction with

As Found/As Left tests.

• Perform loop test with simultaneous analog and

digital mA readout.

• Address new, fast, pulsed-excitation smart

trans-mitters and PLCs.

• Control Hart Scientiﬁc Dry Block Calibrator.

4 Fluke Corporation 750 Series Brochure

–