User's Manual

ManualsBrandsFluke ManualsMultimeterFluke 77 IV

Manual Supplement

Manual Title: 77 Series IV Users Supplement Issue: 2

Part Number: 2695884 Issue Date: 4/13

Print Date: September 2006 Page Count: 3

Revision/Date:

This supplement contains information necessary to ensure the accuracy of the

above manual.

Summary of content (4 pages)

PAGE 1
Manual Supplement Manual Title: 77 Series IV Users Part Number: 2695884 Print Date: September 2006 Revision/Date: Supplement Issue: Issue Date: Page Count: 2 4/13 3 This supplement contains information necessary to ensure the accuracy of the above manual. © 2006-2013 Fluke Corporation. All rights reserved.
PAGE 2
77 Series IV Users Manual Supplement Change #1, 38525 On page 4, under MIN MAX AVG Recording Mode, under the note replace the last part of both sentences with the following: ………….changes longer than 350 ms in duration. On page 13, under Function, replace the MIN MAX AVG, row with the following: MIN MAX AVG For dc functions, accuracy is the specified accuracy of the measurement function ±12 counts for changes longer than 350 ms in duration.
PAGE 3
Manual Supplement 77 Series IV Users Change #3, 63744, 65326 On page ii, replace the Symbols table with: Description Symbols Symbols Description DC (Direct Current)   DC/AC  Conforms to relevant North American Safety Standards Earth ground  Double-insulated  Risk of danger. Important information. See Manual  Hazardous Voltage  Battery.
PAGE 4
77 Series IV Users CAT III CAT IV Manual Supplement Measurement Category III is applicable to test and measuring circuits connected to the distribution part of the building’s low-voltage MAINS installation. Measurement Category IV is applicable to test and measuring circuits connected at the source of the building’s low-voltage MAINS installation. On page 1, delete the 2nd paragraph and the Bullet items.