Brochure

Fluke tools can help you maintain
operational reliability and environmental safety
Fluke understands the oil and gas industry faces a range of challenges from dynamic market fluctuations
to multiple stringent regulatory requirements. Downtime and inaccurate measurements can cost millions.
The professionals that work in the oil and gas industry know it is critical to maintain stable, continuous
operations without sacrificing safety.
Onshore or offshore, upstream to downstream, Fluke makes reliable tools that professionals in the oil
and gas industry can count on for accurate and consistent measurements. Tools designed for the demand-
ing environment, the people who work there, and the challenges they face every day. With 65 years as
the industry leader, they can feel confident that Fluke has the solutions they need to keep the oil and gas
industry flowing. See our full line of innovative products at www.fluke.com
Recommended oil and gas tools
Recommended oil and gas tools
Battery
analyzers
Best suited for:
• Battery resistance,
dc and ac voltage,
dc and ac current, ripple
voltage, frequency and
battery temperature.
• Automatic or manual
sequence testing of
battery strings with
automatic measurement
storage
• Comprehensive logging
Oil and gas applications:
Testing and troubleshoot-
ing and performance
testing of
individual
stationary
batteries and
battery banks
used in critical
battery back-up
applications
Infrared Cameras
Best suited for:
• Fast, non-contact iden-
tification, diagnosis, and
documentation of poten-
tial problems through
imaging of unexpected
thermal signatures
• Reducing the need for
unplanned maintenance
and for confirming
proper repairs
Oil and gas applications:
Steam trap leakage,
electrical panels,
motors, tank
level and
sludge level
indication,
refractory,
furnaces,
reformers,
transformers,
and pumps
Clamp meters
Best suited for:
• Measure 1000 A ac or
dc with fixed jaw to
measure current in mo-
tors, vaults and bus bars
• Clamp around bus bars
or conductors in service
panels to measure loads
and line frequency in
circuits
Oil and gas applications:
Pumps, compressors,
motors, fans, and blowers
Infrared
thermometers
Best suited for:
• Gathering surface
temperature readings
in intrinsically safe
environments
• Reducing the need for
unplanned maintenance
to correct previous
repairs
Oil and gas applications:
Heating, motors, HVAC,
circuit breaker inspection
Visit www.fluke.com/oilandgas
to learn more about Fluke’s test
and measurement tools for the
oil and gas industry.
Dry-block
calibrators
Best suited for:
Calibrating temperature sensors, 4 to 20 mA loop calibration,
and switch testing
Oil and gas applications:
Provides stable temperature source for calibrating RTDs and
thermocouples at custody transfer stations.
Documenting
process calibrators
Best suited for:
• Calibration and
maintenance of process
instrumentation and
control systems.
• Sourcing, measuring and
documenting virtually
any process variable
Oil and gas applications:
Pressure and temperature
transmitter calibration;
calibration and configu-
ration of HART devices;
documenting field
calibrations for recall and
upload
Pressure
calibrators
Best suited for:
• Pressure calibration of
transmitters, gauges,
switches, and custody
transfer meters
• Maintenance of
almost any pressure
device using pressure
sourcing and milliamp
measurements
• Calibrating P/I
instruments with
simultaneous
pressure and current
measurement
Oil and gas applications:
Pressure
measurements
using internal
sensor;
measure mA
while provid-
ing 24 V loop
power
mA Process
clamp meters
Best suited for:
• Measuring 4 to 20 mA
signals without
breaking the loop
• Sourcing, simulating
and measuring mA
• Sourcing, measuring
DC voltage
Oil and gas applications:
mA sourcing, simulation
and measurement;
loop calibration,
maintenance and repair.
Troubleshooting
and commis-
sioning analog
I/O
Insulation
multimeters
Best suited for:
• Testing a wide range
of insulation resistance
and digital multimeter
tests including simple
spot checks to timed
tests
• Troubleshooting and
preventive maintenance
Oil and gas applications:
Switchgear, motors,
generators, electrical
systems and cables;
test voltages from 50 V
to 1000 V
(Insulation
testers to
5 and 10 kV
also available)
Handheld
oscilloscopes
Best suited for:
•
Signal waveform shape,
amplitude, time and
noise or distortion
analysis
•
Troubleshoot critical
systems using an oscil-
loscope by identifying
signal abnormalities or
a change in state
Oil and gas applications:
Motor controls, telemetry
and cathodic protection
systems
Vibration
testers
Best suited for:
• Diagnosing machine
faults to extend machine
life and reduce costs
• Reducing unexpected
serious failures to help
prevent production
stoppages that cut into
the bottom line
• Giving maintenance
staff time to schedule
repairs and acquire
parts
• Anticipating problem
areas before failure
Oil and gas applications:
Pumps, compressors,
motors, fans, and blowers
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. [phone] or
Fax [phone]
In Europe/M-East/Africa [phone] or
Fax [phone]
In Canada (800)-36-FLUKE or
Fax [phone]
From other countries [phone] or
Fax [phone]
Web access: http://www.fluke.com
©2007-2014 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 7/2014 6002373A_EN
Modification of this document is not permitted
without written permission from Fluke Corporation.
Fluke. Keeping your world
up and running.
®
Fluke. Test and measurement
solutions for the oil and gas industry.
Power quality
analyzers
Best suited for:
• Finding power quality
problems before
they damage critical
equipment
• Conducting load studies
to reduce energy usage
applications
Oil and gas applications:
Generators, harmonics
(electronics), load studies
Earth ground
testers
Best suited for:
• Diagnosing intermit-
tent electrical problems
related to poor grounding
• Safety of personnel
and proper operation of
equipment
• Maintaining minimum
resistance in the event of
a large voltage surge or
lightning strike
• Avoiding unnecessary
downtime
Oil and gas applications:
Corrosive soil identification
for cathodic protection
systems, grounding system
interconnectivity/bonding
Digital
Multimeters
Best suited for:
• Rugged, waterproof, dust-proof
and drop-proof work in
petroleum, chemical, or
pharmaceutical environments
• Intrinsically safe DMM testing
and troubleshooting
Oil and gas applications:
Switchgear, motors, variable
speed drives, generators,
electrical systems and cables