Datasheet

95
Accessories
80TK Thermocouple Module
• Converts type K
thermocouple
signals into mV
output
• Connects to DMM
via standard
banana plugs
• Switch selectable
°C or °F
• Range: -50 °C to 1000 °C
(-58 °F to 1832 °F)
• Includes 80PK-1 probe
80T-150UA Universal Solid State
Temperature Probe
• For measurement
of air, surface and
non-corrosive
materials
• Measurement
range:
-50 °C to 150 °C
(-58 °F to 302 °F)
• Output: 1 mV/°C or 1 mV/°F (switch
selectable)
• Connects to DMM via standard banana
plugs
80PK-8, 80PK-10, Pipe Clamp
Temperature Probes
• Type K thermo-
couples clamp
securely onto pipes
for fast tempera-
ture and superheat
measurements
• Durable ribbon
sensors
• 1 m (39 in) lead
• Measure from -29 °C to 149 °C
• 80PK-8 for 6.4 mm to 34.9 mm
(0.25 in to 1.375 in)
• 80PK-10 for 32 mm to 64 mm
(1.25 in to 2.5 in)
Fluke temperature accessories
Turn your digital multimeter into a thermometer
BP7240
• Li-ion rechargeable
battery; nominal
7.2 volt,
4400 mA hr
• Use with 750 Series
Calibrators
BP7235
• NiMH rechargeable
battery; nominal
7.2 volt, 3500 mA hr
• Use in 700 and 740
Series Calibrators
700LTP-1 Low Pressure Test Pump
Hand operated pressure
pump designed to generate
either vacuum to -13 psi/
-.90 bar or pressures to
100 psi/6.9 bar. Ideal for
low pressure applications
requiring accurate low
pressure testing.
700ILF In-line Filter
The Fluke 700ILF can
be used to isolate
the calibrator from
incidental contact with
fluids. Particularly
useful with the 718 calibrator to help
keep moisture or oils from contami-
nating the on-board pump.
700PTP-1 Pneumatic
Test Pump
The Fluke 700PTP is a hand-
held pressure pump designed
to generate either vacuum to
-11.6 psi/-0.8 bar or pressure
to 600 psi/40 bar.
Thermocouple Plug Kits
700TC1
A kit of ten mini-plug
connectors. One each of
the following:
Type J (black)
Type K (yellow)
Type T (blue)
Type E (purple)
Type R/S (green)
Type B or Cu (white)
Type L (J-DIN) (blue)
Type U (T-DIN) (brown)
Type C (red)
Type N (orange)
700TC2
A kit of seven mini-plug
connectors.
Type J (black), two
Type K (yellow), two
Type E (purple), one
Type T (blue), one
Type R/S (green), one
Other temperature accessories
80PK-18,
Pipe Clamp
Temperature
Probe Kit
• Includes both
80PK-8 and
80PK-10
Type K clamps
• Provides full range of pipe measurement
sizes
• Includes soft carrying case to conve-
niently keep both clamps handy for any
situation
80CK-M and 80CJ-M
Type K and J Male
Mini-Connectors
• Isothermal screw ter-
minal for K or J wire
• Suitable for up to 20
gauge thermocouple
wire
• Color coded to industry
standards (K-yellow,
J-black)
• Two per package
80PJ-EXT, 80PK-EXT, 80PT-EXT
Thermocouple Wire
Extension Kits
For extending and
repairing type J, K or
T thermocouple wires.
• Kit includes
3 m (9 ft) of thermo-
couple wire and 1
pair of male/female
mini-connectors
• Maximum con-
tinuous exposure
temperature: 260 °C
(500 °F)
• 80PK-EXT is compat-
ible with type K
thermometers; 80PJ-
EXT is designed for
type J thermometers,
and 80PT-EXT is
designed for type T
thermometers
Process tools accessories
700HTP-2 Hydraulic
Test Pump
The Fluke 700HTP is
designed to generate pres-
sures up to 10,000 psi/
700 bar. Use the Fluke
700PRV adjustable relief
valves to limit pressures from
94 bar (1360 psi) to 376 bar
(5450 psi)
700HTH-1
Hydraulic Test
Hose
The 700HTH is
a 10,000 psi,
700 bar test hose
that connects to a calibration
unit under test from a Fluke
700HTP hydraulic test pump.
700PMP Pressure
Pump
The 700PMP is a hand-
operated pressure pump
to provide pressures up
to 150 psi/1000 kPa.
Output fitting is 1/8
FNPT.
Fluke 700-IV
Current Shunt
Conversion factor:
10 mV = 1 mA
Accuracy (% of
input, one-year): 0.025 %
Input current: 0 mA to 55 mA
Input resistance: 250 Ω nominal
Output resistance: 10 Ω nominal
Accuracy specification applies
from +18 °C and 28 °C to 50 °C
Maximum input voltage: 30 V dc