Industrial temperature calibration selection guide Look inside for: Field metrology wells Infrared calibrators Handheld and field dry-wells 1 Micro-baths Temperature measurement and calibration Tools for industrial instrumentation and calibration technicians Environmental monitoring Thermometer readouts Reference sensors
Selection guide 275 inH 253 O inH O 64% 2 Legend RTD calibration Dial thermometer calibration Temperature transmitter, switch, and controller loop calibration Infrared thermometer and thermal imager calibration Monitoring temperature and humidity
Selection guide NEW! Precision infrared calibrators Field metrology wells Handheld dry-wells Model 9142/9142P page 4 9143/9143P page 4 9144/9144P page 4 4180 page 6 4181 page 6 9100S page 8 9102S page 8 Range –25 °C to 150 °C 4-20 mA 33 °C to 350 °C 4-20 mA 50 °C to 660 °C 4-20 mA –15 °C to 120 °C 35 °C to 500 °C 35 °C to 375 °C –10 °C to 122 °C ± 0.2 °C ± 0.2 °C ± 0.35 °C ± 0.35 °C ± 0.35 °C ± 0.25 °C ± 0.
Field metrology wells Fluke Calibration 9142, 9143, 9144 Field Metrology Wells • Lightweight, portable, and fast • Cool to –25 °C in 15 minutes and heat to 660 °C in 15 minutes • Built-in two-channel readout for PRT, RTD, thermocouple, 4-20 mA current • True reference thermometry with accuracy to ± 0.
Field metrology wells Summary specifications for 9142, 9143, and 9144 Model 9142/9142-P 9143/9143-P 9144/9144-P Range –25 °C to 150 °C 33 °C to 350 °C 50 °C to 660 °C Display accuracy ± 0.2 °C ± 0.2 °C ± 0.35 °C (420 °C) ± 0.5°C (660 °C) Stability ± 0.01 °C ± 0.02 °C (33 °C) ± 0.03 °C (350 °C) ± 0.03 °C (50 °C) ± 0.05 °C (660 °C) Heating time (max) 23 min 5 min 15 min Cooling time 15 min to –25 °C 14 min to 100 °C 25 min to 100 °C Weight 8.2 kg (18 lbs) 7.3 kg (16 lbs) 7.
Precision infrared calibrators Fluke Calibration 4180 and 4181 Precision Infrared Calibrators Accurate yet portable • Combined temperature range of –15 °C to 500 °C • Infrared display accuracy as good as ± 0.35 °C on both units • Convenient handle and weight of 9.
Precision infrared calibrators Excellent performance The 4180 reaches temperatures from –15 °C to 120 °C and the 4181 has a temperature range from 35 °C to 500 °C. Check out the uniformity of the large six-inch targets shown in the thermal imager photo. The uniformity and stability are so good that variations can’t be detected with a thermal imager.
Handheld dry-wells Fluke Calibration 9100S and 9102S Handheld Dry-Well Temperature Calibrators • • • • • • A temperature source that you can take anywhere Fast and easy calibrations of temperature sensors 9100S model weighs only 2 lbs, 3 oz (1 kilogram) Temperature ranges from –10 °C to 375 °C Stability during calibrations to ± 0.05 °C Direct interface to the Fluke 754 Documenting Process Calibrator Each unit includes RS-232 interface, instrument control software and a NIST-traceable calibration.
Field dry-wells Fluke Calibration 9009 Industrial Dual-Block Calibrator Cut your calibration time in half • • • • • • Calibrate temperature sensors fast Independently controlled cold and hot blocks –15 °C to 110 °C (cold block), 50 °C to 350 °C (hot block) Self-contained in a rugged watertight case Four removable inserts, Direct interface to Fluke 754 Each unit includes four removable inserts, including two with holes that are 6.4 mm (1/4 in) and two with holes that are 4.8 mm (3/16 in) in diameter.
Field dry-wells and furnaces Fluke Calibration dry-wells interface directly to the Fluke 754 for fully automated calibration.
Micro-baths Fluke Calibration 6102, 7102 and 7103 Micro-Baths Portability and extreme stability • • • • • • Temperature sensor calibration Stability to ± 0.015 °C Ranges from –30 °C to 200 °C Accepts oddly shaped sensors Exceptional bath portability Direct interface to Fluke 754 Each unit includes a stir bar, power cord, RS-232 interface, instrument control software and a NIST-traceable calibration.
Environmental monitoring “DewK” 1620A High-Accuracy Thermo-Hygrometer Superior accuracy NEW! Network enabled NEW! Upgraded software Powerful logging and analysis tools Two interchangeable calibrated sensors • Huge memory • • • • • Now you can easily monitor and record conditions throughout your entire facility with the DewK’s new Ethernet and wireless capabilities, and set your upgraded LogWare III software to notify you immediately of changing conditions.
Handheld thermometer readouts Fluke Calibration 1551A/1552A “Stik” Thermometers Probe and digital readout combined into one unit Ordering information Accuracy of ± 0.05 °C (± 0.
Precision thermometer readout Fluke Calibration 1529 Chub-E4 Thermometer Lab-quality accuracy on four channels • • • • • • Four channels for PRTs, thermistors and thermocouples Simultaneous measurement on four channels Displays eight user-selected data fields Logs up to 8,000 readings Battery provides eight hours of continuous operation Compatible with LogWare and MET/TEMP II software Recommended accessories: PRT (5626-12-L, 5615-12-L, or 5627A-12-L), thermistor (5611T-L or 5610-L), rugged carrying case (
Temperature sensors Each probe includes: • • • • Individual report of calibration Probe linearization coefficients Resistance vs. temperature table Termination to match your thermometer readout (see spec chart) Tip: Improve the accuracy of your calibration by using an external reference thermometer. Calibrated temperature sensors and indicators can improve your results by a factor of 2 or more.
Training Calibration and metrology training from Fluke Calibration can help you and your staff become more knowledgeable in a wide variety of disciplines. Instructors are experts who work in electrical, temperature, pressure and flow calibration, and who really want to help you learn the foundation and techniques of metrology that you can put to immediate use in your workplace. Fluke Calibration offers introductory, intermediate, and advanced level courses in a variety of formats to meet your needs.
