User's Manual

975
Users Manual
6
Using the Meter
The following sections explain how to use the Meter and
its features.
Softkeys and Pushbuttons
Use the softkeys to navigate among different menus or to
select different functions. Softkeys , , and 
correspond to prompts in the lower section of the display.
Refer to Figure 2 and Table 3. Use the pushbuttons to
select different Meter functions.
F1 F2 F3
TEMP %RH
CO CO
2
%
OUTSIDE
AIR
eba01.eps
Figure 2. Softkeys and Pushbuttons
Table 3. Softkeys and Pushbuttons
Softkey or
Pushbutton
Function

Softkeys- Each softkey corresponds to
prompts on the lower section of the
display. The prompts change depending
on what function menu is used.

CO and CO
2
Temperature/ % Relative
Humidity- Activates the Temperature,
Relative Humidity, CO and CO
2
, Wet
Bulb, and Dew Point functions.

% Outside Air- Activates the % Outside
Air menu. See “% Outside Air”.

Velocity-When used with the optional
Velocity Probe, this activates the Air
Velocity and Volume Flow Rate menus.
See “Air Velocity and Volume Flow
Rate”.

Log/Save- Activates the Log/Save
menus. See “Data Logging”.

Recall- Press this button to access the
Logged Data menu. See “Recalling or
Erasing Logged Data”.

MIN MAX- Activates the Min Max Avg
function. See “Min Max Avg”.

Power- Turns the Meter on and off.

Setup- Press to enter the Setup menu.
See “The Setup Menu”.