User's Manual

975
Users Manual
10
Multi-Language Interface
The Meter’s display supports five languages: English,
French, German, Portuguese, and Spanish. Use the
Setup menu to change the display language. See “The
Setup Menu”.
Measurement Units
The Meter supports both Metric and US measurement
units. Select the desired measurement format using the
Setup menu. See “The Setup Menu”.
Time and Date Stamp
The Meter features an on-board, user settable clock that
logs the time and date for each captured reading. The
current date is displayed when the Meter is powered on.
The Meter continues to keep time when it is powered off.
To change the time and date format, see “The Setup
Menu”.
CO Alarm
The Meter is equipped with a CO alarm. By default, the
alarm is reset to 35 ppm every time the Meter is turned
off. Using the Setup Menu, set the alarm threshold
anywhere from 1 ppm to 200 ppm. When the amount of
carbon monoxide exceeds the limit, the alarm triggers.
The Meter emits an audible alarm and a red LED flashes.
See “The Setup Menu”.
The Setup Menu
Use the Setup menu to change the following Meter
parameters:
• Set Time
• Set Time Format: 12 or 24 hour modes
• Set Date
• Set Date Format: M/D/Y or D/M/Y
• Temperature Scale: °C or °F
• Measurement Units: Metric or US
• CO Alarm: specifies measurement at which the alarm
sounds from 1 ppm to 200 ppm
• Auto Power Off
• Calibration Cycle (1-365 days) [user-configurable]
• Backlight: enables or disables auto backlight off
• Language: the user interface language can be
changed to English, French, German, Portuguese, or
Spanish.
• Keypad Beep: enables or disables the keypad
beeper. The CO alarm is not affected.
To modify the Meter setup parameters:
1. From any screen, press  to enter the Setup
menu editing mode.
2. Press  [
 Item] and  [

Item] to highlight
a listed setup item.
3. Press  [Select] to make the desired item active.